NF-F12 and Crossflow?

[King Damager]

Ok, bit intrigued by this one, but am wondering if/how well it would work?

Planning on doing something whereby I have 2x240mm Rads in a crossflow setup.

Was going to do NF-F12>RAD>NF-F12>RAD>NF-F12 as the rough idea. Just wondering how well this would work really?

kd

 

[SieB]

It would work but it would be easier just to buy a thicker rad.

Plus the top rad would be getting all the heat from the bottom rad blown into it, also adding to it's own heat.

 

[King Damager]

Would be 240x60mm (2 of these). Not planning on 30mm rads, so getting thicker ones would be interesting...

kd

 

[SieB]

One 80mm thick one would do, more rads doesn't mean lower temps, it just means higher overheads so you would be able to throw more heat into the loop without temps increasing with more rads.

For a CPU only loop one 240x60mm rad would be enough, for a GPU + CPU one 360x60mm would be enough and for a CPU + SLI/Crossfire a 360 + 240x60mm would be enough.

 

[airdeano]

but still consider the NF-F12 fans, push or pull or push/pull.

airdeano