My First 4ghz Overclock (980x)
- Thread starter Hay11Mac
- Start date
Been running for 32 minutes
Although webpages are loading at a snails pace, and getting abit of lag.....
32 min
Yes,oc3d load slowly today
Dont use problem size.Use 1024mb ram or higher,and you will see problem size increase also.
If there is a problem,the bar will turn up red,and stop.Or you get bsod or plain reboot.
I set RAM as 1024mb, and left problem size as it was (which is 11530)
I think its my PC that is lagging, mouse is a bit laggy at times
Try reboot,and let it settle 2min,before you start linx.
I ran Linx, but I never restarted after I shut Prime95 off...... Should I run it again???
So do you not run Prime at all??
Yes,that is correct.
Mine is also lagging when i run linx.Not all time,but randomly.
I got a Stopped upon Error!
Linx is more hard than prime.But if you can live with prime stable and 1024mb linx stable,i would call it a day for now.Vcore and qpi need a nudge up if you want it all ram stable.
Tell me about it lol, it's a hard one to crack
I havent changed anything but thought I'd run linx again, it is on number 4 ATM and still running gunna take a while to finish if it does, 11.30 in and on n#4, maybe just bad luck first time ??
Henrik
New member
Personally i don't believe in bad luck when running stress programs
because if it fail on time and you run it again and it passes I still think its unstable
But as Kilobravo sad you will probably be good leaving your settings as they are now, you will probably not encounter any problems under normal day use.
But as Kilobravo sad you will probably be good leaving your settings as they are now, you will probably not encounter any problems under normal day use.
Tell me about it lol, it's a hard one to crack
I havent changed anything but thought I'd run linx again, it is on number 4 ATM and still running gunna take a while to finish if it does, 11.30 in and on n#4, maybe just bad luck first time ??
Sometimes a reboot or restart is enough to get it through.
If it fails now,try with uclk 3400 and 1.36v on qpi.
We are very close on all ram stable
Personally i don't believe in bad luck when running stress programsbecause if it fail on time and you run it again and it passes I still think its unstableBut as Kilobravo sad you will probably be good leaving your settings as they are now, you will probably not encounter any problems under normal day use.
What about gaming though, getting ready for BF3 & COD MW3?
Sometimes a reboot or restart is enough to get it through.If it fails now,try with uclk 3400 and 1.36v on qpi.We are very close on all ram stable
it's just failed on n#8
Going to change the settings you said
How do you know it's the ram that is unstable and not the CPU?
Henrik
New member
oh if I am
I was lucky to get invited to the BF3 alpha and it was F'ing amassing IMO
MW3 we will see I don't like the more arcade oriented games, but sometimes that's fun too
How about you?
