So, on sunday I ordered a shiny new 3570k to replace my g620, as I've needed a bit more cpu grunt for a while now. The new cpu arrived yesterday and needless to say I was excited
I've decided to document my upgrade and show just how much my dual core g620 was holding my pc back
There would be pics of the box etc, but I only managed to get blurry pics
but I did get a small packet of haribo tangfastics along with my shiny new 3570k, thanks to the guys at OCUK
so, down to the benches, I've decided to show load and idle temps, a cinebench run and also say roughly what fps I get in bf3 (min and max fps)
G620 idle:

Capture by Kieran Horne, on Flickr
G620 load:

g620 load by Kieran Horne, on Flickr
g620 cinebench:

g620 cinebench by Kieran Horne, on Flickr
G620 BF3 run - 35 min 70 max damavand peak 48 man server (conquest247 (favourite server
)
and now for the 3570k benches
3570k stock idle temps:

3570k stock idle by Kieran Horne, on Flickr
3570k stock load temps:

3570k stock temps by Kieran Horne, on Flickr
3570k stock cinebench run:

3570k stock cinebench by Kieran Horne, on Flickr
3570k stock BF3 run - 45 min 80+ max caspian border 48 man server (conquest247 again)
I'll be overclocking soon to see the potential of this chip
so as you can see, in terms of cinebench I get a 3x boost in points, for bf3 I get a 10fps boost to minimum framerates (this is rough as I just ran the fraps counter and occasionally looked to check the fps), but overall this was a worthy upgrade imo
My system for cooling and bench purposes is:
CPU - 3570k now
mobo - p8p67 le
Graphics card - HIS 5870 1gb
RAM - 8gb of 1600mhz dominator
PSU - XFX 650w xxx edition
Case - Arctiac white Fractal Design R3
SSD - OCZ Vertex 60gb (BF3 and OS on here)
HDD - 1tb hitachi 7200 rpm
Cooling - Custom watercooling with an EK XT360 rad and 120mm Enermax clusters turned right down on my fan controller
I hope this interests/helps people looking to upgrade

I've decided to document my upgrade and show just how much my dual core g620 was holding my pc back
There would be pics of the box etc, but I only managed to get blurry pics


so, down to the benches, I've decided to show load and idle temps, a cinebench run and also say roughly what fps I get in bf3 (min and max fps)
G620 idle:

Capture by Kieran Horne, on Flickr
G620 load:

g620 load by Kieran Horne, on Flickr
g620 cinebench:

g620 cinebench by Kieran Horne, on Flickr
G620 BF3 run - 35 min 70 max damavand peak 48 man server (conquest247 (favourite server

and now for the 3570k benches

3570k stock idle temps:

3570k stock idle by Kieran Horne, on Flickr
3570k stock load temps:

3570k stock temps by Kieran Horne, on Flickr
3570k stock cinebench run:

3570k stock cinebench by Kieran Horne, on Flickr
3570k stock BF3 run - 45 min 80+ max caspian border 48 man server (conquest247 again)
I'll be overclocking soon to see the potential of this chip

so as you can see, in terms of cinebench I get a 3x boost in points, for bf3 I get a 10fps boost to minimum framerates (this is rough as I just ran the fraps counter and occasionally looked to check the fps), but overall this was a worthy upgrade imo

My system for cooling and bench purposes is:
CPU - 3570k now

mobo - p8p67 le
Graphics card - HIS 5870 1gb
RAM - 8gb of 1600mhz dominator
PSU - XFX 650w xxx edition
Case - Arctiac white Fractal Design R3
SSD - OCZ Vertex 60gb (BF3 and OS on here)
HDD - 1tb hitachi 7200 rpm
Cooling - Custom watercooling with an EK XT360 rad and 120mm Enermax clusters turned right down on my fan controller
I hope this interests/helps people looking to upgrade
