Natashaful
New member
I must have the pink one, No matter the pain
it is for Mayhem to make
, I want my Pink swirly thing.
Mayhems Aurora Coolant - Pre-mixed Liquids
- Thread starter mayhem
- Start date
mayhem
New member
Some Common Questions and Answers.
Does the Aurora range of liquids use metal in the mixture?
The pearlescent pigments used within the Aurora range of liquids contain no metals in the formula.
Will i need a biocide or Inhibitor?
The Aurora range already contains biocides and inhibitor’s and will not require them. The liquids in theory will last up to 3 years.
Will the Pigments in the Aurora Range damage my system?
The pearlescent pigments used in the mixture should not cause any damage to Metal, Plating, Plastics or seals with in a normal water cooling loop.
Is the Aurora Range non conductive?
Short answer is yes out of the bottle the liquid is non conductive. Longer answer is that when first used yes it is how ever once in your loop this will change and the longer it is in your loop the more conductive the liquid will become. This is only a safety measure for you loop to start with.
Do the Pigments in the Aurora Range settle out of the mixture?
Yes they do and this is normal. When left for a few hours the larger particles tend to fall with gravity and settle in the loop. This is very normal and cannot be avoided. We can make the ratio of our mixture stronger and change the viscosity how ever under heavy testing we found the mixture we used is a good trade off between heat dissipation and viscosity. The particles are easily picked up and moved around the system when you pump is turned back on.
Will the Pigments in the Aurora Range block my restricted blocks?
This is a question we are working on at the moment and we will produce a list of working block manufactures that we find compatible with our liquids. However saying that, so far in testing we have found no evidence of blocking what so ever and no evidence of any biomass build up in our fluids. The particles we use over time will get smaller due to the forces they are put under in a water cooling loop. The particles are very delicate and are in the 40 to 120nm (nano) range. However the larger particles 40nm to 80mn when used in restrictive blocks tend to end up like the 120nm particles. We use a special vegetable based formula in these liquids and this helps the partials’ not stick together (clump or create a biomass or what is commonly known in the water cooling community as gunking).
Will the Aurora Range stain my system?
Yes they will if left in your system for a very long period time. This is a common problem with any liquid that use dyes and is a unavoidable fact of liquid that contain dye. To reduce the risk of dying any system we recommend you change out you liquids every 6 to 9 months. This is not a marketing gimmick to make you buy more liquids but over our long term testing of “Mayhem dye range” we found this to be the best compromise to stop the staining effect from happening. However if you system does get stained there are ways to remove the staining.
Are temperatures affected by the liquid?
The short answer to this question is yes. In testing we found due to the viscosity of the liquid the temperatures may increase from 2 to 5c (this is in comparison to Mayhems Ultra Pure H20) depending on your set up. We are still working on getting this information correct and are working with independent testers so that we can gather and correlate as much information together possible. This will give you a fair understanding on what temperature difference you may see.
Does “block maker name” work with your liquids?
We are working with many companies to gather as much information on different blocks and configurations. However some companies we have approached have not responded to our request of getting a sample’s for testing. We cannot cover every block or configuration but we will do our best to get as close as possible answer and will produce a list of tested and working blocks and configurations that we have tested and found to work.
Companies whom have responded and are providing us equipment for testing are
www.Phobya.com
www.ekwaterblocks.com
www.dangerden.com
www.xspc.biz
Any Company is welcome to contact us and send us a sample of their product for testing.
Can i have a sample for my rig?
No you cannot! We will not accept bribes of any manner. These liquids are currently in development and until they are fully tested are not available to the public
.
Were can i get your pigments or how is you liquid made or what’s in them?
No comment.
Do you have a ETA?
No. We are not in a rush to get this product to market.
Do you have a price for Aurora range?
We will let you know when we are ready to release it.
Will your shop have these liquids in stock when ready?
No we will not be selling thee liquids though our shop. We will only be selling these liquids though re-sellers. We only have limited re-sellers in varying territories and we will not flood the market with our products. We feel that flooding the market does no one any good. We are a none profit business so to us we can do this with out any concerns. Eventually when we have enough re-sellers we will be changing our site to a products only site.
I hope this answers any question's you may have how ever if not please just post and i will do my best to answer them.
Does the Aurora range of liquids use metal in the mixture?
The pearlescent pigments used within the Aurora range of liquids contain no metals in the formula.
Will i need a biocide or Inhibitor?
The Aurora range already contains biocides and inhibitor’s and will not require them. The liquids in theory will last up to 3 years.
Will the Pigments in the Aurora Range damage my system?
The pearlescent pigments used in the mixture should not cause any damage to Metal, Plating, Plastics or seals with in a normal water cooling loop.
Is the Aurora Range non conductive?
Short answer is yes out of the bottle the liquid is non conductive. Longer answer is that when first used yes it is how ever once in your loop this will change and the longer it is in your loop the more conductive the liquid will become. This is only a safety measure for you loop to start with.
Do the Pigments in the Aurora Range settle out of the mixture?
Yes they do and this is normal. When left for a few hours the larger particles tend to fall with gravity and settle in the loop. This is very normal and cannot be avoided. We can make the ratio of our mixture stronger and change the viscosity how ever under heavy testing we found the mixture we used is a good trade off between heat dissipation and viscosity. The particles are easily picked up and moved around the system when you pump is turned back on.
Will the Pigments in the Aurora Range block my restricted blocks?
This is a question we are working on at the moment and we will produce a list of working block manufactures that we find compatible with our liquids. However saying that, so far in testing we have found no evidence of blocking what so ever and no evidence of any biomass build up in our fluids. The particles we use over time will get smaller due to the forces they are put under in a water cooling loop. The particles are very delicate and are in the 40 to 120nm (nano) range. However the larger particles 40nm to 80mn when used in restrictive blocks tend to end up like the 120nm particles. We use a special vegetable based formula in these liquids and this helps the partials’ not stick together (clump or create a biomass or what is commonly known in the water cooling community as gunking).
Will the Aurora Range stain my system?
Yes they will if left in your system for a very long period time. This is a common problem with any liquid that use dyes and is a unavoidable fact of liquid that contain dye. To reduce the risk of dying any system we recommend you change out you liquids every 6 to 9 months. This is not a marketing gimmick to make you buy more liquids but over our long term testing of “Mayhem dye range” we found this to be the best compromise to stop the staining effect from happening. However if you system does get stained there are ways to remove the staining.
Are temperatures affected by the liquid?
The short answer to this question is yes. In testing we found due to the viscosity of the liquid the temperatures may increase from 2 to 5c (this is in comparison to Mayhems Ultra Pure H20) depending on your set up. We are still working on getting this information correct and are working with independent testers so that we can gather and correlate as much information together possible. This will give you a fair understanding on what temperature difference you may see.
Does “block maker name” work with your liquids?
We are working with many companies to gather as much information on different blocks and configurations. However some companies we have approached have not responded to our request of getting a sample’s for testing. We cannot cover every block or configuration but we will do our best to get as close as possible answer and will produce a list of tested and working blocks and configurations that we have tested and found to work.
Companies whom have responded and are providing us equipment for testing are
www.Phobya.com
www.ekwaterblocks.com
www.dangerden.com
www.xspc.biz
Any Company is welcome to contact us and send us a sample of their product for testing.
Can i have a sample for my rig?
No you cannot! We will not accept bribes of any manner. These liquids are currently in development and until they are fully tested are not available to the public
.
Were can i get your pigments or how is you liquid made or what’s in them?
No comment.
Do you have a ETA?
No. We are not in a rush to get this product to market.
Do you have a price for Aurora range?
We will let you know when we are ready to release it.
Will your shop have these liquids in stock when ready?
No we will not be selling thee liquids though our shop. We will only be selling these liquids though re-sellers. We only have limited re-sellers in varying territories and we will not flood the market with our products. We feel that flooding the market does no one any good. We are a none profit business so to us we can do this with out any concerns. Eventually when we have enough re-sellers we will be changing our site to a products only site.
I hope this answers any question's you may have how ever if not please just post and i will do my best to answer them.
nothingspecial
New member
Very nice
Don't want to be a "are you doing x colour" muppet, but methinks black/silver and black/gold would be good future additions. Especially the black/gold to go with the Gigabyte UD7s.
Don't want to be a "are you doing x colour" muppet, but methinks black/silver and black/gold would be good future additions. Especially the black/gold to go with the Gigabyte UD7s.
Natashaful
New member
I can't wait till the testings are finished, I love all those nice colours, I use clear in mine at the moment
ShortAlieN
New member
I'm just being impatient mayhem. I cant wait till you get this stuff worked out. I'll be first in line to get some.
Icekube
New member
SieB
New member
mayhem
New member
mayhem
New member
Some more bottles have gone out to independent testers to day.
There has been video uploaded on you tube how ever it doesn't really capture the liquids properly due to lighting issue how ever that's life.
http://www.youtube.com/watch?v=XmlPknJfPwE&feature=mh_lolz&list=LLEJHF269jnN8
There is alot of air in the system which makes it look lousy. Hopefully in a few days time we can see it better. (the reason for him laughing was he did thislive on the internet and i said he was very good a shacking the bottle and must have had practice lol)
There has been video uploaded on you tube how ever it doesn't really capture the liquids properly due to lighting issue how ever that's life.
http://www.youtube.com/watch?v=XmlPknJfPwE&feature=mh_lolz&list=LLEJHF269jnN8
There is alot of air in the system which makes it look lousy. Hopefully in a few days time we can see it better. (the reason for him laughing was he did thislive on the internet and i said he was very good a shacking the bottle and must have had practice lol)
S_I_N
New member
good them it'll give me time to afford it lol I do baby steps or sell off other stuff to buy new stuff and as far as wc stuff goes I dont have any used to sell lol so it'll be a part at a time. Currently pricing out cable sleeving which lucky enough is affordable just time consuming.
