Mach II GT piccies

[Phil Stanbridge]

I'm going to try for 4.3ghz stable shortly and then try some benchmarking. Should provide some very interesting results!

 

[Warlord Shigs]

"This is the max my Corsair 3500 does at 3.35v Not a bad start. Nice tight timings."

phil those corsairs 3500, they are the same chips used in the 3200llpt plats aint they? hopin 2 c 26k 3dmark 01 form that set up phil

 

[aXeR]

w00t good start phil, lets hope u can get way into the 4ghz boundry

 

[Bryan]

Good luck with that P4 mate, buy the thats some nice bh5 you have there

 

[Phil Stanbridge]

4.3ghz (or thereabouts)

 

[aXeR]

w00t nice1 phil, is it maxed out yet? also wots ure core at? only 1.7V? you tried knocking that up?

 

[Bryan]

My GT is here, thanks once again Phil... I'll be back, I hope with a Barton running around the 3.2Ghz mark

 

[Phil Stanbridge]

My GT is here, thanks once again Phil... I'll be back, I hope with a Barton running around the 3.2Ghz mark

I hope your case is ok mate, I've made a bit of a pigs-ear of mine

 

[standin wave]

Phil

I'm green with envy . The forum is gonna be watching every post! I never knew a Packard Bell was so powerful

sw

 

[aXeR]

Phil

I'm green with envy . The forum is gonna be watching every post! I never knew a Packard Bell was so powerful

sw

look wot i started off phill

 

[Epicurus]

while people are on the topic of settings and stuff I have notice in CPU Z that the memory is saying dual, but on mine it says single even though I have a due channel kit.

 

[Phil Stanbridge]

Thats because you have an A64 mate, and they can only handle single channels - not dual. You can use dual channel kits no problem at all, but you wont get the benefits of it until you move to socket 940/939. At the moment with socket 940 you need ECC ram dual channel, shortly though you will be able to use normal dual channel DDR kits.

 

[Phil Stanbridge]

My first 3dmark, with cat 4.4's 23146 3dmarks.

 

[mcmad]

My first 3dmark, with cat 4.4's 23146 3dmarks.

tart

 

[standin wave]

Phil

I can see you're gonna be playing with this til you beat Epi's 25724 - what DO you tell your missus you do all day? Good score though - what dya reckon you can get to?

sw

 

[Epicurus]

ahh but by the time phils beat my score I will have got a higher score.. Watch this space this weekend..

whats your complete setup phil???

 

[Phil Stanbridge]

I reckon I can hit mid 23k with my current setup - this was with the sunon 120mm at 12v, so it was noisy. My card was at 500/400 for this score - it doesnt seem capable of much more than that - We know that 3dmark01 loves FSB and my stable limit appears to be around 270FSB - I can boot higher but the benchies crash out. I need to tweak a few settings here and there.

Remember though, this rig has been configured for aesthetics as well as speed, so I have to comprimise somewhere along the line - the waterchill kit is just perfect for the PC65. I await my chrome case.

 

[aXeR]

i reckon u shud be able to get ure FSB up a bit without too much trouble

 

[Bryan]

I am running my barton at 3 Ghz, will go for 3.1 Ghz a little later on

 

[Phil Stanbridge]

I am running my barton at 3 Ghz, will go for 3.1 Ghz a little later on

w00t. Excellent result mate well done. Bet that flies.