LED Radiator Fans

[SolarNova]

Im gunna have a 240 Monsta rad in the front of my case.
I want to run push pull with fan speed reducers.
So i need 2 Blue LED rad fans to fit to the front and 2 non LED fans for the back.
For the back im thinking Scythe Gentle Typhoons, but i cant seem to find any known good static pressure fans that are quiet (silent) and have blue LEDs.

Any help appreciated.

 

[SieB]

Only ones I know of are

http://www.gelidsolutions.com/products/index.php?lid=1&cid=2&id=57&tab=2

 

[jamesriley94]

I used to use Silverstone AP121s on mine.

I loved those fans, very quiet at 7/5v and look great.

 

[Remmy]

I don't think they're particularly designed for static pressure, but I've seen them on radiators before and I've heard they're good all round fans: Bitfenix Spectre Pro LED Fans

Edit: Looking at the SP rating, they're only 0.05mmH2O behind the SP120 Quiet Editions, which are very popular radiator fans.

 

[Feronix]

+1 for the AP121s

 

[tinytomlogan]

Fan in your case have to match other wise its like having different types of wheels on your car - it looks half finished!

 

[SolarNova]

Normaly i would agree Tom, but in this case the fans will be behind the front 5.25 covers that make the front of the Storm Stryker case with a radiator on the other side of them, you cant actually 'see' the fans persay, just the silhouette from the front, the other rad fans will likely be Gentle Typhoons, which again you wont be able to see due to positioning.
The only fan you will actually be able to see will be the rear exhaust, so in all fairness they can be mismatched.
If they were all visable then yes i would deffinatly agree that they should all be the same.

Thanks for the sugestions peeps, ill look into them.

EDIT: im torn between the White+Blue LED Spectre Pro and the Clear/Silver + Blue LED AP121, the both look fine, specs wise the Spectre has much better AF and Lower SP and video wise from youtube the AP121's see quieter. So ..im thinking Ap121's.

 

[loonie]

put an Led strip in front, and use ''normal" static pressure fans.

 

[Remmy]

Normaly i would agree Tom, but in this case the fans will be behind the front 5.25 covers that make the front of the Storm Stryker case with a radiator on the other side of them, you cant actually 'see' the fans persay, just the silhouette from the front, the other rad fans will likely be Gentle Typhoons, which again you wont be able to see due to positioning.
The only fan you will actually be able to see will be the rear exhaust, so in all fairness they can be mismatched.
If they were all visable then yes i would deffinatly agree that they should all be the same.

Thanks for the sugestions peeps, ill look into them.

EDIT: im torn between the White+Blue LED Spectre Pro and the Clear/Silver + Blue LED AP121, the both look fine, specs wise the Spectre has much better AF and Lower SP and video wise from youtube the AP121's see quieter. So ..im thinking Ap121's.

If it's between those two, then like you said, the AP121s are the better spec fans, so go for those.