Joined the bench team

[kilobravo]

Just started to do some benches.Feel like a real novice,but i have a fine hd5970 from which i expect to do some good results.

The i7-2600k is bench-stable at 5.0ghz @ 1.5v,could have been better but thats fine with me,for now

If the submitted is done wrong,i`ll correct it.

Hope the team can use my results

Damn this is fun

Long time since i had this much fun with my hardware

Maybe i can get 5.1ghz out of my 2600k @ 1.53v for benching.Temps never get past 72c under water.

 

[Rasmus66]

Welcome to the bench team ( velkommen til

)

Have you tested max multi on your 2600K?

 

[kilobravo]

Welcome to the bench team ( velkommen til

)

Have you tested max multi on your 2600K?

Havent tried max multi test yet.But it booted at 100x53,not stable at all,Bsod after 15 sec.Think x59 in bios is max.

And thanks for the welcome (mange tak

)

 

[MSIRawZ]

Welcome mate!

Good going, nice first start. Test your max bootable multi on your chip. Set 1.55v and set your cooling to full and see where you get to

 

[kilobravo]

Welcome mate!

Good going, nice first start. Test your max bootable multi on your chip. Set 1.55v and set your cooling to full and see where you get to

Have a new chip.Booted at 4.5ghz @ 1.3v.At 5.1ghz @ 1.49v right now and expect it would do 100x53.Think i just go for 1.55v @ 100x5x

And thanks for the welcome

 

[Stromatolites]

welcome to the team my friend. You have nabbed us quite a few points! Try working on your chip and once you find its max bench stable frequency, re-run those benches for some more point goodness

 

[kilobravo]

welcome to the team my friend. You have nabbed us quite a few points! Try working on your chip and once you find its max bench stable frequency, re-run those benches for some more point goodness

Right at it,this is fun

Tried this,time to do some re-runs

 

[stevenwright6379]

Nice one could always do with more members on the team

 

[marsey99]

KB if you can get that cpu stable you will get killer boints in the 3d tests dude

 

[kilobravo]

Trying new settings now

.5.1ghz was easy enough,but 5.2+ghz is a pain in the beep

 

[MSIRawZ]

Keep pluging at it. It may just be a bad batch capped at 5.20GHz. We have a good batch at work (Aria) of 2600K at the moment. Some doing 5.5 max. No good for me though, Need a 5.7+ one.

 

[kilobravo]

Could use one of these,but have to save some money right now