Fractal R4 black/red build

I've now turned the rad fans around so that they exhaust out of the case, and moved the roof exhaust fan to the bottom as a filtered intake (trying to keep positive pressure inside the case so it doesn't become a dust magnet!).
 
Nice rig m8.
This is my rig - building as soon as I get last three restorder-parts (PSU/2nd XFX & fans):

Case: Fractal Design Define R4 Black Pearl, Windowed
MB: Asus MaximusV Formula
Prossesor: Intel 3770K
Ram: (4x8Gb) 32GB 1600Mhz Corsair Vengeance Red Low Profile
SSD/Storage: Corsair Force GT 240Gb. Hitachi Deskstar 3Tb 7200
GPUs: 2x XFX R7770 Black Dual fan OC DD.
PSU: Corsair AX 760, Braided red cable-set when available.
Cooling: Front: 2x Corsair AF140 Quiet Bottom: Corsair AF140 Quiet
Back: Corsair AF140 Quiet Top: Corsair H100i/2x Corsair SP120 Quiet
Red rings.
All white interior elements will be painted red.
 
Last edited:
wow, super clean rig! Good luck finding the windowed side panel, it'd be a shame to not show off all that lovely hardware and super clean interior.
 
Nice rig m8.
This is my rig - building as soon as I get last three restorder-parts (PSU/2nd XFX & fans):

Case: Fractal Design Define R4 Black Pearl, Windowed
MB: Asus MaximusV Formula
Prossesor: Intel 3770K
Ram: (4x8Gb) 32GB 1600Mhz Corsair Vengeance Red Low Profile
SSD/Storage: Corsair Force GT 240Gb. Hitachi Deskstar 3Tb 7200
GPUs: 2x XFX R7770 Black Dual fan OC DD.
PSU: Corsair AX 760, Braided red cable-set when available.
Cooling: Front: 2x Corsair AF140 Quiet Bottom: Corsair AF140 Quiet
Back: Corsair AF140 Quiet Top: Corsair H100i/2x Corsair SP120 Quiet
Red rings.
All white interior elements will be painted red.


Have you tried the H100i in the R4 case yet? I was under the impression that the H100/H100i won't fit, as there isn't enough room above the MB. It may work if the fans are mounted on the outside of the case though.

Should be a nice rig! :)
 
any chance u can update the photos? I'm thinking about a r4, h80i combination and I'm wondering how it looks!
 
any chance u can update the photos? I'm thinking about a r4, h80i combination and I'm wondering how it looks!


Done!

I didn't realise that I changes I had made to my photobucket account had affected the previously posted photos.
 
Really nice!
And now I see it won't work with the motherboard I wanted to use, as the 8-pin is at a not so idea location!
Thanks for uploading the pics!
 
Beautiful build, with just a dash of red. Very nicely done mate. Simple yet elegant. enough room in there for everything to breath nicely! :)

well done!
 
After waiting some time for them to become available in the UK, I've finally managed to get my hands on a black windowed side panel for the R4! :D

As far as noise goes, the system does seem to be a little louder now that the side panel is missing a big chunk of the sound dampening material, but not by much.

I just need to get some LEDs now to light it up properly...red...or white... mmm...


PC_38_zps5d943edb.jpg



PC_40_zps58b5225c.jpg


PC_41_zps1fd26682.jpg



PC_42_zps912376fe.jpg


PC_43_zps2a04cefa.jpg
 
Last edited:
omg, this is really nice. I ordered my r4 a few days ago, if my system looks even remotely as nice as yours, I'll consider ordering a windowed side panel as well!
 
Run the frontpannel conectors underneath the mobo, this will clean up the long cables in the bottom.

And i relly dont like the fact that you are running a m-atx mobo in an atx case, i personaly would chose the define mini, if i was planning on having a m-atx mobo.
Dead space look wierd to me.

But apart from that i love the black/dark with a hint of red
 
Back
Top