Crosshair Vi Hero 0d Error

[Awsalli]

Hi,


When I run the rams at high speed (2933mhz & 3000 mhz), I get a 0d error code. Hangs on the Asus logo. The 0d error has been reduced, but it continues to come out. How can I get rid of 0d error? There is no error at 2800 MHz and lower speed.

-I did the Aida64 stability test for 14-15 hours.
-I did the memtest86+ (12 pass)
-I did it on other tests. (hotcpu,prime95,3d mark etc)



I've done tests many times. I'm not getting an error.

Note:I get a 0d error when starting the computer. I have no problems in the Windows environment.



Pc specs:

Asus Crosshair Hero VI
Amd Ryzen 1800x
Corsair 32 (16*2) gb Lpx 3000 mhz
Asus Gtx 1070 Strix

Corsair Rm1000


My English is not good, I'm sorry.

 

[Avet]

If you don't get it at 2.8GHz my best guess is that your RAM overclock isn't stable. Try bumping up SoC voltage to 1.1V, or 1.15V, and your DRAM voltage to 1.4V, or 1.45V. Do it one by one. That way you will know what works, and you won't raise other voltages unnecessary.

 

[Excalabur50]

First if you haven't done so update the BIOS, then see if DHOCP or XMP or what ever they call it in the BIOS will allow it to work after that see if your memory is in the Compatibility List on the Asus website as there are ram issues with the first series of Ryzen chips