CPU water cooling help with NZXT Switch 810 White Case help

Hey I think i will either go with

Hardware Labs Black Ice® GT Stealth 420mm Triple Radiator : GTS420

or

EK CoolStream XTC 420mm Triple Radiator Black : XTC 420

dont know which one through but i think i might go with the

Hardware Labs Black Ice® GT Stealth 420mm Triple Radiator : GTS420

what do you think?

Also a note for the pump which one should i get

Alphacool VPP655 / Laing D5 Single Edition Pump : VPP655SE

or

Aquacomputer Laing D5 Pump with Tachosignal???????????????

I would not got with a rad thinner than 55mm. The stealth is to thin IMHO the alphacool monsta is perfect for the Switch 810 and it will be silent cause it works extremely well with low rpm fans.

Here is the pump I would get Pump it is the variable speed pump so you can turn down the speed of the pump.

There are multiple variations of this pump but they are all the same.

Alphacool makes the VPPP656, Swiftech makes the MCP655, then you have the Laing D5. But in the end they are all the same they are all the Laing D5.
 
80mm thick rad will fit but only in pull (fans on outside top of case. plus is way overkill for a cpu only loop.plus for a cpu only loop a 35mm 360 rad will be plenty
 
umarabid I thought I read earlier stating that you might possibly put your gpu on the loop as well? I may have been thinking of another thread but if not then my apologies. I was recommending the monsta for that reason. Anyways I hope you get everything soon and you are happy with w.e you decide.
 
I might put a gpu on this just waiting for the NVidia card to come out do you think I could have gtx 680 2 and a cpu loop with the MagiCool Limited Edition "Monsta" 420/360 Triple 120mm / 140mm Xtreme Performance Radiator??????????????????????

Also for the fans I have two opition they are the NF-P14 or CF-V14H so I have to ask which fans should I get for this rad?

ps do I need a top with these pumps as its going in the dangerden Monsoon D5 is this wright?
 
Back
Top