Cooler master cosmos s 2 ?

Madden1984

New member
Hi I'm going to be buy parts for my new pc soon.

I have a cosmos case for my back up pc.

And want to get an other cosmos s case. love the case.

b4 u say it. I no it not perfect.I hate the way hd cage is design, no CPU cut out hole. And no rubber cover on the clabe management holes.

but still love the design over all. I just want to know if there any word if cooler master is going to bring out a new cosmos s or is that the end off that product line replace by the half x

If there is il just mod the case with a CPU hole change the hd cage to the same as the cosmos 1000 and give it a nice black print job inside and put a window in the side panel

Reply if you hread there going to be a replace r not
 
Have you taken a look at the cosmos pure. I don't know of they releasing a new cosmos case yet but that is by far my favorite of those chassis.
 
Cosmos2 has been on the cards ages. Just no one has really seen it YET and we dont know when its out.

People waiting around for unseen hardware to be released always makes me LOL though
tongue.gif
 
Cough Cough i know about the cosmos 2 hehe but sorry guys not allowed to say anything as its still in development
 
id love to mate but id probs end up with my "dogs Danglies" in a vice haha

hey so long as it isnt urs whats the prob??????

lmao couldnt resist that

but I wasnt referring to anything that'll get ya in trouble or fired thats why I suggested persuading the powers that allow info leakage
 
hey so long as it isnt urs whats the prob??????

lmao couldnt resist that

but I wasnt referring to anything that'll get ya in trouble or fired thats why I suggested persuading the powers that allow info leakage

haha im going to ask if there is any information i can give out like harddrive bays and such internals

How many fans

General case specs
 
Thank cooler master fezz

Lol can u sent me 1 to review when it could open
smile.gif


Il thinking off may just mod the cosmos s

change the hd cage like the cosmos 1000

Putting a CPU heatsink hole in

Paint inside black and the back

Paint the 2 door chrome with CPU door in chrome but with a huge cooler master logo light blue.

Put a window on the other mayb a nvidia logo that side.

And a mad mod top going to mod the i/0 by change the led to green and putting in 2 USB3 keep the othe USB but changing the esata to a red 1 than the 1 that in there now.

And going to make a new fan top going to make Finns a bit like the top of the new alienware case but then will not close and will b chromed

Going for a i7 960

Sniper g1

Nvida msi 570

And going to be water cooled and going to use push pull so going to have 9 r 10 fans in it lol

Don't know yet what else il put in

What people think of my ideas don't mind if you think it silly just say why
 
I'll just leave this here......
cool.gif


http://www.maximumpc.com/article/news/supercharge_your_desktop_these_dream_machine_2011_wallpapers

Bear in mind this is considered a concept, but in cases past they sometimes remain pretty close.

This cse just blows my mind ... I love it and do I count 10 expansion slot's! *drools*

The only negative thing i can see being an issue would be the air flow, that said though if there are 2 or 3 fans in the roof and that 200 in the front actually moves some air It could be great.

Thoughts?
 
Found some info and pics on the Cosmos 2 it is a prototype so the final case could be slightly different. But i do want
biggrin.gif


Cooler Master have released an updated version of the Cosmos line of PC cases which gave Cooler Master its name as a maker of quality PC cases. The case is very curved in its design and has the suspended rails on the top and bottom much like the Cosmos I case. The case has additional air intakes on the side panels which the original Cosmos didn't have but the Cosmos II is still of a very similar size.

The front panel features two USB 3.0 ports and four USB 2.0 ports alongside the standard audio jacks and power/reset buttons. Five LED's exist: Front, Top, GPU, LED and HDD. The front of the case is covered by a slider which when pulled down reveals three external 5.25" drive bays and two external 3.5" bays. Inside you will find 11 3.5" drive bays with some of them being adaptable for 2.5" drives. The lower hard drive bays rely on two optional 120mm fans for cooling while the top ones use the front 200mm intake fan for cooling.

A Padded PSU bay, wide CPU socket cut-out, XL-ATX motherboard support, Liquid cooling tube holes, 10 PCI-E Expansion slots, lots of cable management options and many spaces for additional fan cooling. Expect the case to hit the market in September.

BaZZZl.jpg


r4X94l.jpg


owIScl.jpg
 
the front reminds me of the rv01 reventon mod and I love rv01s so I love this too
biggrin.gif
they better bring out an orange one or I'll do it myself (if I can afford one that is)
tongue.gif
 
More info and pr0n pics of the final version for anyone interested.

As main features are compatibility with motherboards and-ATX size, XL-ATX, ATX and M-ATX, which added to its compatibility with 10 +1 PCI-E devices in one box makes it compatible with any hardware. In fact, it is expected that this box is compatible with the famous motherboard manufacturer EVGA DR2.

On its front panel are 2 USB 3.0 ports, 4 USB 2.0 (although the technical characteristics that have 2 put a typo, it is clear in the photographs has 4 USB 2.0), an e-SATA and two minijacks audio joined at the bottom of the icon COSMOS DNA in aluminum, which is also on top.

The entire chassis exterior is made of aluminum painted black, and its interior is made of steel is also black. It has two hot-swap hard drive, support for 4-way SLI / CrossFire, space to install radiators 360mm and has a higher cooling capacity thanks to its integrated 4-channel rehobús.

Following cooling, has a 200mm front fan, one 140mm rear, two 120mm and one 120mm side for hard disks. It also has the option of installing 3 more 120mm fans on top and two additional 120mm on the side.

zevs9l.jpg


GsblYl.jpg


uzWY9.jpg
 
i bet its a fackin fortune

I read that it's rumored to be around £200, I am definietly getting it though, as long as nothing bad comes up in reviews about it that is but looking at the pics I can't see any probs with it at all.
 
Dont forget Guys its still in development this is a late prototype and the final version may differ from this

Hope you all like it when its released i will get one but i think im going to stop with my excising case (tom knows the case im on about haha)

Adam Ferrol
 
Back
Top