Cant enable "CPU Ratio Unlock" PC Crash

[Blo0dyClub]

I don't know why, but i cant enable CPU Ratio, i have all drivers and chipsets installed.

Before i using W7 and i used "AI Suite 3" "Auto Tuning OC" and its work, now i have W10 and "Auto Tuning OC" didn't work.

I try it manually in Bios, If i only enable "CPU Ratio Unlock" the PC restarted in log windows, if i disable that option the PC run normally.

I want do to OC, here my specs:

Asus GeForce Strix GTX 960 DirectCU II OC 2GB GDDR5
Asus H81 Gamer Edition
Cooler Master Hyper 412S CPU Cooler
Intel Pentium G3258 3.2Ghz Edition 20 Anniversary
Kingston HyperX Fury Red DDR3 1866MHz 8GB 2x4GB CL10
Seagate Barracuda 7200.14 1TB SATA3
Tacens Mars Gaming 600W

Whats is the problem? Why my PC crash when i only enable that option? I dont touch any option only that and PC crash.

 

[tinytomlogan]

Have you tried changing the CPU Core Ratio?

 

[TPC]

Which bios version do you have?

 

[Wraith]

Like TTL said above, you need to set the Core Ratio to manual first before you can change the Ratio Unlock. I have the same UEFI bios and also had the G3258 at 4.6Ghz.

 

[Blo0dyClub]

Have you tried changing the CPU Core Ratio?

Yes i try changing core ratio cpu but it restarted too, any minimal oc dont work.

Without any oc, any voltaje, im dont touch nothing any option, only enabling "CPU Ratio Unlock" PC dont work, its restarted on windows log. Why this happend? :/

My Bios version is 0505.

 

[Wraith]

Are you using any XMS profiles? I found with XMS profiles active the overclocking functions wouldn't work with the G3258.

 

[Blo0dyClub]

Like TTL said above, you need to set the Core Ratio to manual first before you can change the Ratio Unlock. I have the same UEFI bios and also had the G3258 at 4.6Ghz.

The problem its not what in need to do to change cpu ratio unlock, the problem is, if i put to enable only "CPU Ratio Unlock" option, and i save and exit, PC restarted on windows log.

Are you using any XMS profiles? I found with XMS profiles active the overclocking functions wouldn't work with the G3258.

Not sure but im dont thing

 

[Wraith]

Just noticed your trying to change the DRAM frequency to 1600Mhz... you can't do it with the G3258, I tried and tried and tried the IMC (internal memory controller) only supports 1333Mhz.

If you try changing the DRAM frequency it will just crash and load defaults, I had this merry go round when I ran the G3258.

 

[Blo0dyClub]

I put DRAM to 1333Mhz save and exit, and it work normally, after that im try again enabling "CPU Ratio Unlock" but it still dont working. :/

 

[tinytomlogan]

^^^^Please do not multi post. If you need to make another reply use the edit button on your previous post.

 

[AlienALX]

I would check to see if there is a newer bios. IIRC (and don't shoot me if I'm wrong) H81 clocking was only unlocked quite long after the chipset had come out.

 

[cooperman]

This is actualy a windows 10 problem with the G3258

https://communities.intel.com/thread/77391

Video how to fix

 

[Blo0dyClub]

OH MAN! Thanks a lot Cooperman, now its work!! Windows 10 OMG... ¬¬

Thanks all Forum for help me, i love OC3D! 1M Thanks!