x264 HD BENCHMARK - Results Please

[FTLN]

Evening All,

Just found a pretty cool benchmark for cpu's....

x264 HD Benchmark 4.0 Download Make sure you install the AviSynth 2.5.8 Codec Download

1st pass of the encode is a scan and not very cpu intensive, 2nd pass is cpu intensive and allows your cpu to shine,,,

Copy and Paste your text file results not forgetting to to fill in your system details.

 

[FTLN]

i7 920 D0 @ 4.5ghz -

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Results for x264.exe r1913

==========================

Pass 1

------

encoded 1442 frames, 159.34 fps, 3911.63 kb/s

encoded 1442 frames, 166.71 fps, 3911.63 kb/s

encoded 1442 frames, 163.12 fps, 3911.63 kb/s

encoded 1442 frames, 164.42 fps, 3911.63 kb/s

Pass 2

------

encoded 1442 frames, 41.64 fps, 3959.71 kb/s

encoded 1442 frames, 41.82 fps, 3959.80 kb/s

encoded 1442 frames, 42.00 fps, 3958.69 kb/s

encoded 1442 frames, 42.00 fps, 3960.24 kb/s

System Details

--------------

P6T SE (P6T Deluxe Bios)

i7 920 d0

20gb RipjawsX @ 9 9 9 24 1T 1600mhz

Here are my results stock 920 -

Results for x264.exe r1913

==========================

Pass 1

------

encoded 1442 frames, 109.26 fps, 3911.63 kb/s

encoded 1442 frames, 109.13 fps, 3911.63 kb/s

encoded 1442 frames, 108.36 fps, 3911.63 kb/s

encoded 1442 frames, 106.25 fps, 3911.63 kb/s

Pass 2

------

encoded 1442 frames, 26.49 fps, 3960.59 kb/s

encoded 1442 frames, 26.57 fps, 3958.95 kb/s

encoded 1442 frames, 26.43 fps, 3960.25 kb/s

encoded 1442 frames, 26.43 fps, 3959.55 kb/s

System Details

--------------

P6T SE (P6T Deluxe Bios)

i7 920 d0

20gb RipjawsX @ 9 9 9 24 1T 1600mhz

 

[JMMP]

Results for x264.exe r1913

Pass 1

encoded 1442 frames, 179.29 fps, 3912.26 kb/s

encoded 1442 frames, 180.07 fps, 3912.26 kb/s

encoded 1442 frames, 180.52 fps, 3912.26 kb/s

encoded 1442 frames, 180.93 fps, 3912.26 kb/s

Pass 2

encoded 1442 frames, 37.55 fps, 3961.23 kb/s

encoded 1442 frames, 37.65 fps, 3961.31 kb/s

encoded 1442 frames, 37.71 fps, 3961.04 kb/s

encoded 1442 frames, 37.62 fps, 3961.44 kb/s

2ºRUN WITH SAME SETTINGS

Results for x264.exe r1913

Pass 1

encoded 1442 frames, 182.30 fps, 3912.26 kb/s

encoded 1442 frames, 180.52 fps, 3912.26 kb/s

encoded 1442 frames, 182.69 fps, 3912.26 kb/s

encoded 1442 frames, 181.96 fps, 3912.26 kb/s

Pass 2

encoded 1442 frames, 38.15 fps, 3962.11 kb/s

encoded 1442 frames, 37.98 fps, 3961.75 kb/s

encoded 1442 frames, 38.01 fps, 3961.51 kb/s

encoded 1442 frames, 38.12 fps, 3962.01 kb/s

System Details

Processor 1 ID = 0

Name Intel Core i5 2500K

Codename Sandy Bridge

Specification Intel® Core™ i5-2500K CPU @ 3.30GHz

Package (platform ID) Socket 1155 LGA (0x1)

CPUID 6.A.7

Extended CPUID 6.2A

Core Stepping D2

Technology 32 nm

TDP Limit 95 Watts

Core Speed 4577.5 MHz

Multiplier x FSB 44.0 x 104.0 MHz

Stock frequency 3300 MHz

FID/VID Control yes

Turbo Mode supported, enabled

O/C bins unlimited

MOTHERBOARD

GIGABYTE GA-Z68X-UD3H-B3

 

[FTLN]

Pass 1

encoded 1442 frames, 179.29 fps, 3912.26 kb/s

encoded 1442 frames, 180.07 fps, 3912.26 kb/s

encoded 1442 frames, 180.52 fps, 3912.26 kb/s

encoded 1442 frames, 180.93 fps, 3912.26 kb/s

Pass 2

encoded 1442 frames, 37.55 fps, 3961.23 kb/s

encoded 1442 frames, 37.65 fps, 3961.31 kb/s

encoded 1442 frames, 37.71 fps, 3961.04 kb/s

encoded 1442 frames, 37.62 fps, 3961.44 kb/s

Nice scores man, slightly faster on the 1st pass than me, but the hyperthreading of the i7 got you on the second.....

I wonder what TTL's new Encoding rig would score....

 

[Rastalovich]

I've got a rig testing at the house atm, I'll run it through if I get the chance.

Without looking at the benchie yet, is there a way to use it on your gpu for comparisons ? (most of my client work use gpu transcoding)

 

[FTLN]

Nope, purely cpu for the moment... I have yet to see a encoder that uses purely the Gpu and give good results.

Gpu is good for rendering effects etc but for base encoding then there is a long way to go yet...

Looking forward to seeing your results though

 

[JMMP]

Nice scores man, slightly faster on pass 1 than me, but the hyperthreading of the i7 got you on the second.....

I wonder what TTL's new Encoding rig would score....

Thanks!

But is not much difference between having hyperthreading enabled and mine which does not have it!!!

I think his rig will double our score....!!!

 

[FTLN]

But is not much difference between having hyperthreading enabled and mine which does not have it!!!

Here is my 920 @ 4.5 with HT off, slightly slower than the your i5...

Pass 1

------

encoded 1442 frames, 177.08 fps, 3912.26 kb/s

encoded 1442 frames, 181.25 fps, 3912.32 kb/s

encoded 1442 frames, 182.32 fps, 3912.26 kb/s

encoded 1442 frames, 181.96 fps, 3912.26 kb/s

Pass 2

------

encoded 1442 frames, 35.27 fps, 3962.00 kb/s

encoded 1442 frames, 35.36 fps, 3961.15 kb/s

encoded 1442 frames, 35.36 fps, 3961.33 kb/s

encoded 1442 frames, 35.40 fps, 3961.42 kb/s

 

[JMMP]

Here is my 920 @ 4.5 with HT off, slightly slower than the your i5...

Very nice for an old I7... don,t be so hard on it cas it may burn!!

 

[FTLN]

Just had to do a cmos reset trying for 4.6 ........ I'm gonna take your advice though cos I think it will most probably burn.... Temps hit the roof over 1.45v on the H100

Would be nice to see some other benches peeps....

Oh and mods,, should this be in the bench section of the forum or is that part of the forum just for you hadrcore benchers benching for the team ??

 

[Rastalovich]

No time to play with the rig tonight, but here's a screenie:

Errored out at the end. Something about can't save/find filename. I'm assuming it's the System Details text.

MediaCoder I tend to use for Cuda x264. Works very well on the cheapest of cards. Mostly any video format to mp4 container transcoding.

 

[FTLN]

No time to play with the rig tonight, but here's a screenie:

Errored out at the end. Something about can't save/find filename. I'm assuming it's the System Details text.

MediaCoder I tend to use for Cuda x264. Works very well on the cheapest of cards. Mostly any video format to mp4 container transcoding.

Nice one, so looks like clock for clock sandy bridge is almost identical to bloomfield.... JMMP can you do a run at 4.5ghz ?

 

[Rastalovich]

Just went back 10 mins later and ran a 2nd time, no changes made, didn't error out this time:

Pass 1

------

encoded 1442 frames, 186.55 fps, 3911.63 kb/s

encoded 1442 frames, 182.30 fps, 3911.63 kb/s

encoded 1442 frames, 183.93 fps, 3911.63 kb/s

encoded 1442 frames, 181.61 fps, 3911.63 kb/s

Pass 2

------

encoded 1442 frames, 42.49 fps, 3959.41 kb/s

encoded 1442 frames, 42.44 fps, 3959.69 kb/s

encoded 1442 frames, 42.36 fps, 3959.15 kb/s

encoded 1442 frames, 42.29 fps, 3959.82 kb/s

System Details

--------------

Name Intel Core i7 2600K

Codename Sandy Bridge

Specification Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz

Specification PC3-16000

Specification PC3-16000

Specification PC3-16000

Specification PC3-16000

Core Stepping D2

Technology 32 nm

Stock frequency 3400 MHz

Core Speed 4490.3 MHz

Northbridge Intel Sandy Bridge rev. 09

Southbridge Intel ID1C44 rev. 05

CAS# latency (CL) 9.0

RAS# to CAS# delay (tRCD) 10

RAS# Precharge (tRP) 9

Cycle Time (tRAS) 27

Command Rate (CR) 2T

Command Rate 2T

Command Rate 2T

Command Rate 2T

Command Rate 2T

Memory Frequency 931.4 MHz (1:7)

Memory Type DDR3

Memory Size 8192 MBytes

Windows Version Microsoft Windows 7 (6.1) Ultimate Edition Service Pack 1 (Build 7601)

Number of processors 1

Number of threads 8

Number of threads 8 (max 16)

L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size

Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX

Package (platform ID) Socket 1155 LGA (0x1)

Temperature 0 36∞C (96∞F) [0x24] (SYSTIN)

Temperature 1 64∞C (147∞F) [0x80] (CPUTIN)

Temperature 2 64∞C (147∞F) [0x80] (AUXTIN)

 

[JMMP]

Here some pictures! Temperatures are with Corsair h100!

 

[KING_OF_SAND]

Is lower FPS better? I am still trying to understand this test. Maybe this is a retarded question and I am seeing but really not

 

[Damien c]

I'll test mine tonight, with my 2700k @ 4.8ghz and also if it will manage it then I will run it at 5.2ghz as well, as I know I can get to windows at 5.2ghz but not sure how long it will run for.

 

[FTLN]

Here some pictures! Temperatures are with Corsair h100!

Not bad for 4.5 but I would say your probly closer to 4.6 than 4.5

 

[FTLN]

I'll test mine tonight, with my 2700k @ 4.8ghz and also if it will manage it then I will run it at 5.2ghz as well, as I know I can get to windows at 5.2ghz but not sure how long it will run for.

Faster FPS is Better, this will generate lots of heat on 2nd pass so be carefull

 

[Damien c]

Faster FPS is Better, this will generate lots of heat on 2nd pass so be carefull

Cooling should be fine to be honest as all I will do is put my fans back on 12v while I do it, and then drop them down to 5v once it's done.

CPU is cooled by a 360mm 60m, rad with fans in push/pull highest temp's I have seen up to now is around 71c at 5.0ghz.

 

[JMMP]

Not bad for 4.5 but I would say your probly closer to 4.6 than 4.5

What about now?

Results for x264.exe r1913

Pass 1

encoded 1442 frames, 170.73 fps, 3912.26 kb/s

encoded 1442 frames, 171.14 fps, 3912.26 kb/s

encoded 1442 frames, 169.83 fps, 3912.26 kb/s

encoded 1442 frames, 171.63 fps, 3912.26 kb/s

Pass 2

encoded 1442 frames, 34.94 fps, 3961.85 kb/s

encoded 1442 frames, 34.76 fps, 3961.10 kb/s

encoded 1442 frames, 34.69 fps, 3961.06 kb/s

encoded 1442 frames, 35.24 fps, 3961.08 kb/s

System Details

Name Intel Core i5 2500K

Codename Sandy Bridge

Specification Intel® Core™ i5-2500K CPU @ 3.30GHz

Core Stepping D2

Technology 32 nm

Mainboard Model Z68X-UD3H-B3

Stock frequency 3300 MHz

Core Speed 4498.3 MHz

Hardware monitor ITE IT8728

Voltage 0 1.26 Volts [0x69] (CPU VTT)

Voltage 1 2.06 Volts [0xAC] (VCC3)

Voltage 2 12.02 Volts [0xF5] (+12V)

Voltage 3 5.02 Volts [0xF4] (+VCC)

Voltage 5 1.38 Volts [0x73] (CPU VCORE)

Voltage 6 1.65 Volts [0x8A] (DRAM)

Voltage 7 3.36 Volts [0x8C] (+3.3V)

Temperature 0 30°C (86°F) [0x1E] (TMPIN0)

Temperature 1 24°C (75°F) [0x18] (TMPIN1)

Temperature 2 26°C (78°F) [0x1A] (TMPIN2)

Fan 0 2090 RPM [0x143] (FANIN0)

Fan PWM 0 0 pc [0x0] (FANPWM0)

Fan PWM 1 0 pc [0x0] (FANPWM1)

Fan PWM 2 0 pc [0x0] (FANPWM2)