searching for a new case

[Mgut91]

Hey, i am searching for a new case, kinda bored of my haf 932 and i need it to be compatible with atx motherboard with 2 harddrives and 1 ssd, should be 9 expansion slots with room for 360mm rad(60mm thick) and 240mm(45mm thick) without any mod.
Also need to have 4 drive bays, two for reservior, 1 for fan controller and 1 for spare, just in case i find something to put there, should also be room for a 20cm power supply.
Hope you guys can help me, because.. i haven't found anything, i'm out of luck

 

[Remmy]

The NZXT Switch 810 will fit that exact configuration with no problems and no modding easily. You can get a 360mm 60mm thick rad in push/pull in the top, and a 240mm 80mm thick with push/pull in the front. It has 9 expansion slots, and loads of room for the PSU. There's plenty of room for your HDDs and SSDs too.

It has 4 optical bays, the top of which IS half obscured by the top rad, however you can still fit a fan controller in the top bay if its not too long (I've got first hand experience running it exactly like this).

I realise you probably already have all of these parts and are just swapping from the HAF, but I'd personally recommend a tube res so you have more free room in your optical bays, and I also think the tubing is neater and nicer looking

 

[| raVen |]

NZXT Switch 810 will be perfect for your needs
I was using that case for about 7/8 months and it pleasure to build rig into it

 

[Mgut91]

yh, i have all the parts, just gonna change the case, but ty for the help, might buy this really soon.

 

[NeverBackDown]

Switch 810, Caselabs,900D,Fractal Design ARC XL(when its released), or a Phantom 820 are a few off the top of my head.