Rv03 and H100???

| raVen |

New member
Hi guys
smile.gif


Currently i have Nhd14
cool.gif
But I'm thinking about Corsair H100, only because I would like to have bit more clearance in my case window(noctua covering 50%).So I'm just not sure if I can fit h100 in front of my case (already have there 2sets of fans).

If somebody know please let me know
smile.gif


Thanks
wink.gif
 
Its a air cooling case the noctua is better. corsair cooling is crap. i dont think you will fit the fans and radiator in because of mobo clearance.

eh maybe im wrong then
 
Hi guys
smile.gif


Currently i have Nhd14
cool.gif
But I'm thinking about Corsair H100, only because I would like to have bit more clearance in my case window(noctua covering 50%).So I'm just not sure if I can fit h100 in front of my case (already have there 2sets of fans).

If somebody know please let me know
smile.gif


Thanks
wink.gif

Hi m8 I have the RV03. and have a 120 rad and twin fan setup at the top of the case.

But if you revome the drive bays (bit a of a chore their is about 12 screws in each) then you can easily mount the h100 rad in the front and position it so the tubes go over the top of the fan mounts.

Or you move the fan bracket up and have the tubing coming out at the bottom.

I have just brought a 240mm G-changer and their is plenty of room for that in the front with a 4 fan setup.

also i just built my friend a PC and used this:

http://www.specialtech.co.uk/spshop...-H20-920-CPU-Water-Cooling-Kit-pid-13935.html

Its actualy an awsome cooler, And does a great job. Kustom PC have a reveiw on it and gave it the BEST COOLER AWARD in their mag.

And I can tell you that My friends PC did not go above 58c on stress testing with a 4.3ghx OC on a 2500k
 
Thanks for reply mate.

I checked and its just looks like you cannot mount h100 in front of this chassis, because the rad its longer than fans and its not enough space at the top
sad.gif


Can you show me some pictures of this how you mount the 240 rad??

Thanks
smile.gif


ruthless_villain: Its better but I don't mind about 2C more, I just would like to have more clearence
smile.gif
Also there is no way to have problem with mobo clearence.
 
Here you can see a 240 rad. this is not the g-changer that will be here tommorow.

SDC11879.jpg


And here you can see the barbs that will clear the top of the fan due to their being enough space to mount a drive their.

Obviously there will be alot more room once i remove the 120 rad and fans from the top.

SDC11880.jpg
 
Looks good
smile.gif


But what about spacing at the bottom.Because h100 its longer than 120fan from both sides.

100% sure that will fit h100?
cool.gif


Also what spray are you used to paint strips??
23.gif
 
Looks good
smile.gif


But what about spacing at the bottom.Because h100 its longer than 120fan from both sides.

100% sure that will fit h100?
cool.gif


Also what spray are you used to paint strips??
23.gif

used halfords Car paint m8. Just give the strips a sanding use a decent etch primer and then paint them waht ever colour you want. Sort of a tutorial in my build log.
 
Thanks m8 i seen your tutorial
smile.gif
I go for green painting, but first I have to find some shop with spray paintings in birmingham
blink.gif


Looking at this rad in front of your case I just think that maybe its right time for me to go for proper water cooling???

But I never done this before
blink.gif
 
it got a Tiny Tom Logan Thumbs up and a OC3D Gold Award. it seems a very good all in one soloution

( watch his you tube review, he looks WELL suprised when it beat the noctua on one OC lol )
 
Back
Top