Res mount on rads?

[The_Governour]

Is there any res mount brackets out there where I can mount my res to my rad WITH FANS in push pull?

I know there are some mounting mechanism that lets you mount a rad to the fan holes on your rad..

BUT I am not looking for this - more of something LIKE that but so you can mount your Res to your fans ON TO your rad. I would guess that with this mounting set shown here then if I would mount that to my fan... then it would touch the fan blades.

I dont know if I am explaining my self well enough......

 

[Cru]

what about the same mount shown in the picture but with 30mm screws?

 

[KING_OF_SAND]

This is very useful if you are building a Micro ATX or mini ITX and your space limited. But the problem is not only do you have the heat from the RAD you also have the heat from the res.

 

[NeverBackDown]

what about the same mount shown in the picture but with 30mm screws?

Ya probably the easiest way around it without spending much. Though in all fairness push/pull is only for looks unless used for a Monsta rad.

 

[Remmy]

what about the same mount shown in the picture but with 30mm screws?

That was my first thought too

 

[paulstung]

The problem with that picture, is if you were to mount it the way they are showing you need to rivet the res bracket to the mounting bracket. I bought one a while ago only to find that out. Sorry no help to your question just do what Cru said.. the easiest way .

 

[The_Governour]

So is there any other bracket out there that can be mounted like this or is this the only one?

I would have to mount it in push/pull on a XTX and I would like to use the XSPC photon 270 for looks.

how much heat would the res give out? any impact on temps? Would be running a 4670k with a slight OC of about 4.4 at 1.238v and have a GTX 780 with a XSPC waterblock.

 

[Cru]

how much heat would the res give out? any impact on temps? Would be running a 4670k with a slight OC of about 4.4 at 1.238v and have a GTX 780 with a XSPC waterblock.

how much radspace? probably not much though

 

[The_Governour]

I would have 1 x RS360 in the top and the XTX 360 at the front in push/pull in the H440. Just trying to figure out where I could place the res and with a bracket like that then I could fit it.

Just worried about the heat out put of the rad nd the res like some one mentioned.

 

[Ciric]

The heat is a none issue
Just use the one you've linked, but with longer screews.

I've used theese, to mount both the rad and the res to the 5,25 bay at the same time:
http://www.caseking.de/shop/catalog/EK-Water-Blocks-EK-UNI-Holder-50-70::14334.html