Thelosouvlakia
Classy-Fried-Chicken
TTL towers must be full of things and Tom just wants to clear some space it seems 
"Re-born"
- Thread starter Wraith
- Start date
Wraith
Bettyswollocks
Corsair made this easy, I'v done no physical mods to the case the panels just slide in place, and the motherboard panel is screwed to the extra stand offsNot a fan of all the carbon wrap, but the PSU cover is really nice! At least you did something creative with it
Ooooh Tom getting everyone curious again.
Unfortunately this particular board is limited to 1333Mhz Max, I can't alter the memory timings.
Cables are the devils work and must be tidied or hidden.Lovely build so far! Not a fan of the carbon wrap too, but the PSU cover is indeed very nice! I like how to managed the cables too.
And indeed very generous of Tom! He does really care about the community, faith in humanity = restored
Lacing is the way to go, it really keeps those cables in check.
Excalabur50
Well-known member
It's Alive! It's Alive! Nice one Wraith looking good man.......So what's the Guv got in store for you then boyo
SUPERFLY013
New member
Love the way everything is turning out! You defiantly deserve it! can't wait to see what the guv has in store for you next. Something tells me it's going to be good
Dicehunter
Resident Newb
Wraith you lucky sod ^_^
Wraith
Bettyswollocks
Thanks guys.
She's been on solid now for the last 48hrs, I've had some serious photoshopping to get done for our upcoming dog show, and while the missus's laptop was capable, it's nothing on this. There is a lot to be said for SSDs, I've missed my rig like crazy.
She's been on solid now for the last 48hrs, I've had some serious photoshopping to get done for our upcoming dog show, and while the missus's laptop was capable, it's nothing on this. There is a lot to be said for SSDs, I've missed my rig like crazy.
Last edited:
Wraith
Bettyswollocks
I have to have a clean well maintained system ^_^, I had a couple of stickers left over from my last build, I make them myself.
yer there is something to be said for clean and tidy
ahh righto mate might have to get myself one if its cool with Tom
enRodjavel
New member
Love that Ya getting some sweet Guv-Love cause I see you all over OC3D helping Out. well-earned m8, well-earned )=D.
Hope the Guv. finds the piece he is looking for hehe...
And the Carbone looking awsome.
Hope the Guv. finds the piece he is looking for hehe...
And the Carbone looking awsome.
Wraith
Bettyswollocks
Means I'm going to have to go bigger with the video, or go really indepth with the build log? Suggestions?Very nice Wraith, looks like Tom is sending out another parcel!
Thanks dude, I do like tidy cables, although I hadn't noticed the PCI power socket until after I'd fitted it, then remembered it from TTLs review back in March.. It had me scratching my head for a few minutes, but all sorted now.Very clean Wraith, Love how you've routed the cables for the 750 up the side of the case, very clean and look awesome imo
Excalabur50
Well-known member
Wraith give yourself a smack like I had to recently you have double posted, BTW the rig is looking sswweeettt!!
Yes Wraith, the new board and plats are looking good in there. I do for some reason always think that Plats and H100i's belong together and Vengeance Pros belong with H105's. If your cutting down on the carbon then it sounds like your going the right way in that respect, I always think that leaving everything exposed and making it all beautiful is the way to go. I don't like builds that hide radiators and PSU's, covering something up and being a clean freak are never the same.
Anyway for improvements most importantly I would cable tie those SATA's down the edge of the motherboard tray. I know it's tight don't rip the plugs off but just give them a kink and they will go, also the couple at the top hanging down need strapping tight to the optical cages. There's nothing worse than seeing cables where there should be a big open space. I also noticed your running the fan splitter into the H100i which is fair if your out of fan headers on the motherboard or the controller isn't as good, I can see why you may have to run them off their but I would avoid if possible and then never install Corsair Link lol.
RE: SMTCC I would try 9-11-10-30 1600 1.5V with no CPU overclock, if that doesn't work something is a miss and the BIOS has gone squirly :huh:
JR
Anyway for improvements most importantly I would cable tie those SATA's down the edge of the motherboard tray. I know it's tight don't rip the plugs off but just give them a kink and they will go, also the couple at the top hanging down need strapping tight to the optical cages. There's nothing worse than seeing cables where there should be a big open space. I also noticed your running the fan splitter into the H100i which is fair if your out of fan headers on the motherboard or the controller isn't as good, I can see why you may have to run them off their but I would avoid if possible and then never install Corsair Link lol.
RE: SMTCC I would try 9-11-10-30 1600 1.5V with no CPU overclock, if that doesn't work something is a miss and the BIOS has gone squirly :huh:
JR
Wraith
Bettyswollocks
Yeah Carbon fibre is going
There are far too many rigs sporting it now, I've found a nice matt black vinyl to wrap the acrylic with (keep it simple). There are 2 panels going in though, 1 will sit between the drive cage and PSU (Not covering the PSU) just covering cables in the base, and the other panel is going to sit between the drive bays and optical bay (more of a motherboard tray extension) so the loose cables in the back have more hiding space. As for the H100i I will be running the fans via separate headers with a nice fan curve as the Bios is a dream to work with (confusing at first).. on that note anyone else who may be considering using this board for a build DO IT! Although do not try installing windows seven from a external ODD, it will not work (USB3 and all that funk)
