Quick Question

[Habs]

I know it says it can on the site, but will this pump work for a cpu block and a 6970 block? http://www.specialtech.co.uk/spshop/customer/product.php?productid=14807

 

[S_I_N]

I would look into more of a custom loop if I was you. I think the pump could handle it but at what temp sacrifice. And puttinga custom loop together can get expensive

 

[Habs]

I would look into more of a custom kit if I was you. I think the pump could handle it but at what temp sacrifice. And puttinga custom loop together can get expensive

So you think the pump will cause low temps? Is one 360 RAD okay?

 

[S_I_N]

So you think the pump will cause low temps? Is one 360 RAD okay?

sorry lol didnt make myself clear no I think the rad cant handle the 2 blocks but the pump will and if you did it with this kit you'd have higher temps on both cpu and gpu also without knowing ur entire setup I cant say 100%

 

[Habs]

sorry lol didnt make myself clear no I think the rad cant handle the 2 blocks but the pump will and if you did it with this kit you'd have higher temps on both cpu and gpu also without knowing ur entire setup I cant say 100%

What if i get 2 360's in a sandwich configuration, fan,rad,fan,rad? also i would need a better pump if i added another rad, wouldn't i? How many metres of tubing should i get? and is 2 liters of fluid enough?

 

[S_I_N]

well 2 360's would defo handle the heat and yes a stronger pump will be needed. I myself have never tried sandwiching two rads together I would imagine the heat from one would elevate the heat in the other making it not viable. plus not to mention the real estate that would take up. If your not concerned about it being in the case Tom linked a rad that was external mounted and iirc could handle 9 120mm fans I'll see if I can find the link 4 ya

link to the rad http://specialtech.co.uk/spshop/cus...20-LT-Radiator--9x120-Black-LT-pid-12345.html

also iirc the EK series of rads have been reported to be not as good as the RX series.

 

[Habs]

well 2 360's would defo handle the heat and yes a stronger pump will be needed. I myself have never tried sandwiching two rads together I would imagine the heat from one would elevate the heat in the other making it not viable. plus not to mention the real estate that would take up. If your not concerned about it being in the case Tom linked a rad that was external mounted and iirc could handle 9 120mm fans I'll see if I can find the link 4 ya

Na it's okay, i'm not big on external loops. I might just cool the cpu then. Thanks for the help.

 

[mayhem]

that pump in the set up even though stated at 750 isn't that good. a 18w DDC is much better. if you going to 2 rads than go for a better set up. in the long run it will give you better performance and will end up costing less.

 

[S_I_N]

that pump in the set up even though stated at 750 isn't that good. a 18w DDC is much better. if you going to 2 rads than go for a better set up. in the long run it will give you better performance and will end up costing less.

I'd actually have to agree there Mick while it is a decent pump for its intended loop one would figure at 750l/hr you'd see the fluid moving I sometimes have to put my hand on mine to see if its running as its ultra quiet and cant see the fluid moving well