Project :: Waveline

[imported_Bazza]

here we, go but sorry for the piceeys, they are done with a 2 megapixel Phone camera (Sony Ericsson W810i) ....

I moved the Radiator and re-mounted as far forwards as it would go.., then taking a jigsaw, took large chunks out of the top.. heres how t now looks with a piece of CAM cut black Acrylic, with a sheet of UV blue ontop....

and from the frount

and heres a general shot,

the wire managment still has someway to go, but so far it all works, and can't be seen.

now, after loosing some of the bolts, i got some M4 x 60mm bolts, and then changed some of the mounting thumb screws with large washers and a M4 nut..

and now the PSU actually fits..

now back to my current past-time,

watching House.

hopefully will get some pics if the hardware arrives tommorow...

 

[imported_Bazza]

well, i like coming back to packages....

Unfortunaley Ocuk didn't pack it very well...

Yay, my X1800XT, laying intact...

and the block thats going on it....

 

[imported_Bazza]

heres a piccey of the Block with the flash from my phone camera, it sooo shiny!!!

And the block mounted-

well, tommorow my parents are bringing me the rest of the hard ware, so even more photos!!!

AJ.

 

[stocky]

Nice work

I use to hvae a CM WaveMaster - I like what you've done with yours...

What's the full system spec?

 

[Baldrick]

Love the look of the acrylic against the black. :B

 

[imported_Bazza]

sorry about putting this in the wrong area of the forum...

here are the last bits of the thread 'cut and paste'

well heres todays update....

ive got the Res mounted with the frount screws, but havn't got the bit of aluminium with me, so it doen't look to good... also, theres a clear / uv blue acrylic raditor shroud / box to go between the fans and the rad....

another pic. of the res....

And the RAM goes in.... (looks like Mushkin Redline, and is DDR-500)

and in goes the 160Gb Hitachi deskstar....

Installing the cables for the Vantec Mexus CPU (pump) control and Temp display..

sensors on the HDD,

The CPU

and the *case* temp is put on the outside of the rad where the cooler water exits..

and a lovely large mass of boxes....

heres how we are at the moment.....

it seems i need some more barbs and some cable tiding stuff, then its pretty much done..

thanks for the feed back people......

Baldrick: the acrylic is done with a laser cutter..

heres the overall spec...

Opteron 146 CAB2E 0602 GPKW

Asus A8N-Sli Deluxe (too become a DFI Xpert later)

1Gb (2 x 512) Vietesta DDR-500 (to become TCCD or Mushkin Redline)

X1800XT 256 (waiting for R-600)

160Gb Hitachi deskstar

NEC 4570A DVD-RW

BIX 2 Rad

DDC with Plexi-top

TDX A64

Maze 4 A8N Chipset Block

Eddy Ek X18/19

and lots of other random stuff.........

 

[maverik-sg1]

What GPU block are you using? Looks loverly

Mav

 

[imported_Bazza]

Its an Eddy EK X18/19 block..

its for all varitations of the card, and fits like a dream, and comes with a voltage regulater........

 

[maverik-sg1]

Can you PM me details.

Cheers

Mav

 

[imported_Bazza]

done.....

 

[maverik-sg1]

Received thank you

Mav

 

[imported_Bazza]

hoping to get some more stuff done today, like a dry run, and some more cable management.............

and yes,... there will be picceys.....

 

[imported_Bazza]

here we are....

starting to dry-run the rig...

TDX A64 and BIX 2 with some lovey ... jublie clips..... mmmm nice....

its looking juciy, but i need something to support the card as the PCB is bending under the weight of the water-block....

thats all for toady then people...

 

[Drazic]

if you got some spear of that 1/2 hose use some of that to stand that card up. Warm it up in your hands and bend it, cut it even both ends will do the job nicly

 

[imported_Bazza]

i guess, but im going to use the plastic exteroor of a cold cathode, and if i can, mabey shove a 4" CC under it....

well, im going home from the end of term today, and i'll try and update....