Project: Cobalt (Chromed Copper Pipes, Custom Laser Etched Midplate and More....)

JordanMac

New member
8rom1d4.jpg

Image Courtesy of "therussianpotato"

Parts list

PC Components


CPU- Intel i5 3570k
Motherboard- Gigabyte Z77X-UD5H
Hard Drive- Seagate Barracuda 1tb
SSD Boot drive- Intel 330 series 60gb x2 (RAID 0)
PSU- Corsair tx750m
Fans- 140mm silverstone air penetrators x5
Memory- Corsair Vengeance 8gb blue 1600mhz
Graphics Card- MSI/Nvidia GTX 670
Case- Modified Nzxt Switch 810 gun metal
Sleeving- MDPC Blue,white and grey Heatshrinkless

Watercooling Components


Reservoir- Bitspower Z-Multi 150mm Water Tank
Tubing- 10mm Chromed Copper Pipe
CPU Waterblock- XSPC Raystorm
GPU Waterblock- XSPC Razor gtx 670 full cover block
Radiator 1- Thermochill PA140.3
Radiator 2- Phobya G-Changer 280 Radiator
Coolant- Mayhems Pastel Blue
Pump- XSPC / Laing D5 Vario



Finished Pictures

hhpkP7g.jpg


mXLCRsY.jpg


uTgACf8.jpg


2BRCB9D.jpg


pK3UsUZ.jpg


vJ5hoKV.jpg


Z5hMux8.jpg


LxEaXai.jpg


AHVR8ai.jpg


Please leave me a comment :)
 
Last edited by a moderator:
The HDD looks out of place but the rest of the build looks so awesome. Really nice job!:dribble:
How did you do the midplate?
 
as awesome as it looks, my ocd can't seem to settle down. one of the pipes going down from the gpu is slightly bent outwards and I just hate the size of the gpu but thats just personal preference. other than that I'd say it's stunning, proper good job mate :)
 
The HDD looks out of place but the rest of the build looks so awesome. Really nice job!:dribble:
How did you do the midplate?

Thanks, the hdd is down there just to be out of the way so you can't see it and the midplate is made by laser etching acrylic, painting it and sanding it carefully.
 
I really like how these pipes look as if their shapes were simplified. Obviously those aren't simple hoses that can bend but maybe it's because of the colour of the pipes? Just something that came into my mind at a first glance.

Also, in the second picture, the power cable for the GPU going around the pipe looks like a solar prominence :P
 
I really like how these pipes look as if their shapes were simplified. Obviously those aren't simple hoses that can bend but maybe it's because of the colour of the pipes? Just something that came into my mind at a first glance.

Also, in the second picture, the power cable for the GPU going around the pipe looks like a solar prominence :P

Yeah the pipes have been simplified a lot, this done just by tons of planning. the pipes have a max of 1 bend in them so i didn't have to work out any angles etc. thanks for your comment :)

I keep coming back to this, like every hour. So much awesome!

One kick ass looking rig mate, well done :D

thanks so much guys, your comments are awesome :)
 
litle question the power cable in the diffrent colors did you do that yourself or bought it like that if u did it yourself what cable sleeve kit did you use because i like it alot

also the rig on itself is freaking awsome
 
litle question the power cable in the diffrent colors did you do that yourself or bought it like that if u did it yourself what cable sleeve kit did you use because i like it alot

also the rig on itself is freaking awsome

thaks for your comment, i did the sleeving myself. the sleeving is white, grey and aquamarine blue for mdpc.
 
Love it!! Very smart job on the piping too, avoiding crazy bends. I'm guessing that proper planning you did made your life a LOT easier in the end. :) You're making me second guess my Raystorm now though, since my ports are side by side. Sure hope I didn't miss something in the manual on that one!
 
Love it!! Very smart job on the piping too, avoiding crazy bends. I'm guessing that proper planning you did made your life a LOT easier in the end. :) You're making me second guess my Raystorm now though, since my ports are side by side. Sure hope I didn't miss something in the manual on that one!

thanks for the comment, you can mount the block either way up you want. :)
 
Back
Top