Project Awesome

[Dandaman91]

I managed to get some pictures today, this is how we sit at the moment

After looking at the case again I dunno if I could keep any of that hard drive cage with a rad in the floor as I may have to offset it to the right to have some cable room from the PSU.

If I don't end up placing the rad on the floor I will have to find a way to mount it at the front

 

[ccaution]

Pretty much WOW

Damn elegant result

 

[Choklitmlk]

awesome looking rig mate, job well done

one thing I'd like to see you do is tidy up some of the cabling. most of it is great, but there's a couple of weak spots.

the front I/O and usb cables should be pulled a bit tighter and given a uniform bend (this really is just me being pedantic )

you could greatly improve aesthetic by having a play with your pcie power cables to the GPU's, they seem to stand a bit too proud and stand out too much in my opinion.

not saying it doesnt already look great, but I personally just think that having put all the time and effort (and money) into a gorgeous build like this, you gotta be a bit anal, ya'know

 

[Saltire35]

A Corsair H100i would finish it off in my opinion.

 

[Dandaman91]

awesome looking rig mate, job well done

one thing I'd like to see you do is tidy up some of the cabling. most of it is great, but there's a couple of weak spots.

the front I/O and usb cables should be pulled a bit tighter and given a uniform bend (this really is just me being pedantic )

you could greatly improve aesthetic by having a play with your pcie power cables to the GPU's, they seem to stand a bit too proud and stand out too much in my opinion.

not saying it doesnt already look great, but I personally just think that having put all the time and effort (and money) into a gorgeous build like this, you gotta be a bit anal, ya'know

Cheers bro, I'm not very good at the cable tidying side of things but I'm slowly getting the hang of it. I'll end up re-doing it when I get my water loop in there anyway. The cables are pretty stiff to work with so the Pci-E cables are a bit of a pain to work with.

A Corsair H100i would finish it off in my opinion.

I've already got my heart set on a custom water loop but I don't think an H100i would look out of place at all.

 

[CPMFW]

nice progress mate... looking really good

 

[Choklitmlk]

Cheers bro, I'm not very good at the cable tidying side of things but I'm slowly getting the hang of it. I'll end up re-doing it when I get my water loop in there anyway. The cables are pretty stiff to work with so the Pci-E cables are a bit of a pain to work with.

i know what you mean, im using once of corsairs cable kits in my build, and though they are gosh damn sexy, they are stiff out of the box.

i found the key to a good result was taking off all unnecessary cable ties & trying to pull the cables down the side/edge of the gpus pcb. then pulling them tight from behind the mb tray makes it look sharp

after a while the cables do become a bit easier to use (they get softer) aswell, which helps

 

[dipzy]

Build looks awesome dude,the carbon effect gives it a nice touch