jimma47
New member
I thought they did?
Post A Picture of Your Last Purchase
- Thread starter MrKambo
- Start date
I thought they did?
Doomslayer
New member
Yeah they did
barnsley
born in a.....
It was on a heavy discount at the time and I've had better experience with Netgear than TP-Link in recent history. TP is still better than ubiquiti though...
TPC
New member
so they run at half rpm in a normal PC enviroment, 1000rpm that is. Plus you can throttle them even more with PWM control.
Excalabur50
Well-known member
Just bought one of these and the nicest case I've built in so far
Tolemac
Active member
Just bought one of these and the nicest case I've built in so far
Nice
I got the Enthoo Pro also in white and that was a pleasure to build in 
AlienALX
Well-known member
Just bought one of these and the nicest case I've built in so far
haha I knew you would end up getting a new case to go with those new parts
Pics of the rig would be nice too
NeverBackDown
AMD Enthusiast
The archer line for them is some of the highest rated routers, that is why I recommended it
I have the C7 and it's flawless in my experience excluding the fact it doesn't have beamforming/mu-mimo
barnsley
born in a.....
I know they've got good reviews for the most part but, much like dell, I don't like supporting companies who've done nothing but screw up for me.The archer line for them is some of the highest rated routers, that is why I recommended it
-edit-
Wifi is now all setup and I'm getting faster wireless 2.4ghz with a weak signal (50 down, 5 up)then I ever had wired with the old router.
Now I get the full 75 down, 5 up I was promised with all my devices. Success!
Last edited:
Excalabur50
Well-known member
jimma47 I always was black and white as my 780T was 
, and AlienALX if my 780T wasn't developing problems I wouldn't have changed I don't think and I'll get some pics in the Dragon's Mist thread soon
, and AlienALX if my 780T wasn't developing problems I wouldn't have changed I don't think and I'll get some pics in the Dragon's Mist thread soon 
Dicehunter
Resident Newb
As I have all white LED Corsair AF/SP fans in my case I decided to get 1 x Corsair 120mm red LED AF fan for the bottom of the case, Tried 140mm but there's only mounting holes for 2 x 120mm's.
Going to be putting it on a fan speed reducer and right underneath the GPU so not only does it give the bottom of the case a nice red glow but pushes a bit of cold air towards the GPU fans
Going to be putting it on a fan speed reducer and right underneath the GPU so not only does it give the bottom of the case a nice red glow but pushes a bit of cold air towards the GPU fans
Excalabur50
Well-known member
The 780T had a missing led motherboard header plastic sheath since day one, and the back door ended up buckling and not from cables either as my first case had the same buckle out the box and then when i picked it up to put the new kit in it one of the rubber feet fell off and naturally landed sticky side down on the carpet and got covered in fluff and wouldn't stick no more so I got the S***s and replaced it and TBH I'm glad I did as this new case is easier to build in and quieter straight out the box so really happy
Doomslayer
New member
Yep the 750D was giving me the s****s as well i'm happy that i changed too, To the Define S IMO the Define S is 100 times better in the build quality and looks compare to the 750D.
When i was touching it, It was rocking from side to side, Side covers feel really light compare to the Fractal side covers.
jimma47
New member
I have a 500R and the PSU surround was slightly warped from the factory, I dented the side panel moving it around and the rubber gromets make my hands go black (they also killed a set of bitfenix extensions before I worked out what was causing the discolouration.)
Aside from that however I'd have to say it was very easy to build in and looks good (imo). Was also one of the first (mid tower) cases I came across that supported 240mm AIOs out of the box.
But yeah starting to think of new cases for my next build. Won't be for a while as the Z77 and the 3770 is still very capable. I'd like a smaller form factor tho. MATX or something. Tempted by the H440 and the NIMNI 805 (once you see it it can't be unseen) but nothing has made me feel I absolutely have to pull the trigger just yet. InWin was very close to getting my dollars..
Now if the Define S came in white...
Aside from that however I'd have to say it was very easy to build in and looks good (imo). Was also one of the first (mid tower) cases I came across that supported 240mm AIOs out of the box.
But yeah starting to think of new cases for my next build. Won't be for a while as the Z77 and the 3770 is still very capable. I'd like a smaller form factor tho. MATX or something. Tempted by the H440 and the NIMNI 805 (once you see it it can't be unseen) but nothing has made me feel I absolutely have to pull the trigger just yet. InWin was very close to getting my dollars..
Now if the Define S came in white...
