Post A Picture of Your Last Purchase
- Thread starter MrKambo
- Start date
TheOrangeOne
New member
Its here! Canon EF 100-400mm f/4.5-5.6L IS II USM Lens
That's a seriously epic looking lens! What camera are you using with it?
SuB
The Webmaster
You sure that thing ain't gonna break off the thing of the camera Tom?... It looks massive on it!
which is precisely why you mount it on a tripod using the tripod mount on the lense.. and not the camera
My 100-400 rental turned up lastnight, my god you feel nosey looking out a window with that thing. ZOOOOOM
Dicehunter
Resident Newb
Sold my Superflower 1200w Platinum and used the funds to get the Corsair RMi 1000w -
Now my system is fully Corsair equipped minus the headset which I do actually have a Corsair 1400 but never use as I have my Beyerdynamic 990 Pro's.
Did this purely from an aesthetic and uniform point of view, Now I just have to wait a while to get the fully sleeved black cable kit
Now my system is fully Corsair equipped minus the headset which I do actually have a Corsair 1400 but never use as I have my Beyerdynamic 990 Pro's.
Did this purely from an aesthetic and uniform point of view, Now I just have to wait a while to get the fully sleeved black cable kit
Last edited:
Excalabur50
Well-known member
Its here! Canon EF 100-400mm f/4.5-5.6L IS II USM Lens
I have the series one of this lens it's Chuffing awesome, put it on my 7DMkii
TPC
New member
Sold my Superflower 1200w Platinum and used the funds to get the Corsair RMi 1000w -
Now my system is fully Corsair equipped minus the headset which I do actually have a Corsair 1400 but never use as I have my Beyerdynamic 990 Pro's.
Did this purely from an aesthetic and uniform point of view, Now I just have to wait a while to get the fully sleeved black cable kit
you finally got the only thing corsair is sometimes good at!
Dicehunter
Resident Newb
In all fairness all my Corsair products have not disappointed at all, The only things that went slightly wrong were the original K95 I had but that got replaced with the RGB K95 which has proper ESD protection and an H100i which I overly tightened the screws on and sheared the mounting holes.
All the Corsair products I have perform brilliantly
Dicehunter
Resident Newb
1200w is way too much for my needs, I will never use that much and I've gone full Corsair for the uniformity and so I can get the fully sleeved cable kits
barnsley
born in a.....
SSD
JR
Don't get me started on that. The failure rate I've had with the force 3s that we use at work has been so bad I've been put off buying corsair SSDs for life.
The failure rate for their products (for me atleast) has been awful. Good thing they have fantastic customer service.
This is a bit old but it has arrived now.
MAF sensor for my Corsa as it has packed up. It's a Bosch one (the exact same as the original on the car) so it should last. Cost me a pretty penny, infact more then the amount I paid for the car in the first place.
Shoutout to Kambo for helping me diagnose the fault!
Dicehunter
Resident Newb
Don't get me started on that. The failure rate I've had with the force 3s that we use at work has been so bad I've been put off buying corsair SSDs for life.
The failure rate for their products (for me atleast) has been awful. Good thing they have fantastic customer service.
This is a bit old but it has arrived now.
MAF sensor for my Corsa as it has packed up. It's a Bosch one (the exact same as the original on the car) so it should last. Cost me a pretty penny, infact more then the amount I paid for the car in the first place.
Shoutout to Kambo for helping me diagnose the fault!
For me it's been Asus that's been the worst.
Every monitor I've ever had from them has had at least 5 dead/stuck pixels and all the Asus motherboards since 2006 have had a fault at some time bar my current one, Touch wood ^_^
barnsley
born in a.....
To be fair, the only Asus GPU I've owned was a poorly made mess. did get amazing temperatures though. Motherboard wise (and in my experience monitor wise) you can fault them.
shambles1980
New member
Well because the postoffice "lost" my ek fc780 water block i had to but an xspc razor 780 water block.
not that dissapointe ad it is a bit of an upgrade in many ways (better cooling for 90% of the card. with vrm cooling being slightly worse than the ek but still verry good.)
Kind of peeved at the post office who seem to be "losing" more and more stuff this last year or so.
even our post man said they have had a lot of complaints about stuff never arriving. I imagine they have started hieing low pay temp staff at sorting offices again.
any way here is a pic.
i did not get the back plate although i was tempted to. but as there are no ram chips on the back of this card i decided it wasnt worth the extra (atleast not at this point)
not that dissapointe ad it is a bit of an upgrade in many ways (better cooling for 90% of the card. with vrm cooling being slightly worse than the ek but still verry good.)
Kind of peeved at the post office who seem to be "losing" more and more stuff this last year or so.
even our post man said they have had a lot of complaints about stuff never arriving. I imagine they have started hieing low pay temp staff at sorting offices again.
any way here is a pic.
i did not get the back plate although i was tempted to. but as there are no ram chips on the back of this card i decided it wasnt worth the extra (atleast not at this point)
