Dicehunter
Resident Newb
2 x 6 foot 5" tripods for my VR lighthouses.
Last edited:
Post A Picture of Your Last Purchase
- Thread starter MrKambo
- Start date
2 x 6 foot 5" tripods for my VR lighthouses.
Wouldnt wall mounts have been better?
they look space consuming
Dicehunter
Resident Newb
Wouldnt wall mounts have been better?
Sadly I rent at the moment and I have to leave the place immaculate so it makes it a lot easier not putting anything on the walls, I'd prefer wall mounting but it's a pain having to seal, Sand and then paint.
Also bought 16GB of Corsair Vengeance LPX 3600MHz 18-22-22-42 *2x8GB* as my current Corsair Vengeance RGB Pro 3200MHz 16-18-18-36 *2x8GB* is not actually compatible with my motherboard according to Asus which could be the reason I'm experiencing a lot of random reboots since the latest bios update, According to them it apparently makes the mobo a hell of a lot more memory sensitive and non qualifying memory makes the motherboard quite unstable.
Last edited:
SPS
Moderator
Is this for your body painting hobby?
g0ggles1994
Active member
Not going to lie, that film was a waste of Christopher Lee
KingNosser
Well-known member
2nd kit of 2x8gb 3200mhz not sure if i'll be able to get full speed but i don't mind tinkering was far cheaper than the first kit cost me 
After a few hours of tinkering managed to get 2933mhz with all 4 dimms, had to bump my cpu volts a little ryzen 1700@4ghz ended up at 1.425v but after some short testing it seems stable for now temps are in check so I'm pretty happy about it
Will just use as normal and keep an eye on things hopefully it wont blow up
After a few hours of tinkering managed to get 2933mhz with all 4 dimms, had to bump my cpu volts a little ryzen 1700@4ghz ended up at 1.425v but after some short testing it seems stable for now temps are in check so I'm pretty happy about it
Will just use as normal and keep an eye on things hopefully it wont blow up
Last edited:
AlienALX
Well-known member
New airbrush
I will be coming after you for advice soon.
I want to start custom painting bike frames. Like, really custom painting bike frames (ghost flames ETC).
What sort of compressor do you need for that? is it small enough to hide when you are not using it?
NeverBackDown
AMD Enthusiast
What keyboard is that in the background? Looks like Corsair keys but the wrist rest doesn't look like Corsair at all
Depends on the size of the coverage and the detail you want.
You will need a good quality compressor for that, and over here they run about 700-800 quid.
Plus you are going to want a larger airbrush, preferably trigger design like this and a much larger pot for mixing and spraying most likely top fed/gravity fed. Compressors have a rule I believe, 30mins on 15mins off or something like that. 30mins of usage, and 15mins of cooldown.
And those kinds of compressors are not huge, but not small either. Maybe 30cmx30cmx40-50. Depends on quality. Im not the best for advice here as I still see myself as a novice, but youtube has a plethora of really damn good spraying and buying advice.
But for detailing etc. This airbrush I just bought is one of the best there is. Just google reviews on the Eclipse HP CS (larger cup) or HP BS (Small cup) HP = High preceision
For detailing you want low psi, so make sure the compressor has good variation. Im guessing for you, you want a range 1-60psi for large frames. If its just detailing you want then a 1-40 should be your go to point. For miniature painting, 1-20psi is enough.
Brand wise for airbrushes, I would not use anything other than, hard&steener, Iwata, or badger. With those brands, you can often use heavier paint, or heavier pigment and maybe even allow some sparkle thrown in which would clog most other brands.
And its a K95 keyboard. I had it on sale for 60% off so my Little ducky panda keyboard will have to wait.
Last edited:
AlienALX
Well-known member
Nah I literally want one just like you have. It's not for doing the paint dude. I will use cans for that. It's for flames and skulls etc. Which are all small (given it's a bike frame).
Being ghost flames it needs to be super low pressure too, so the paint is transparent.
Oh and cheers, it gives me a starting point
Being ghost flames it needs to be super low pressure too, so the paint is transparent.
Oh and cheers, it gives me a starting point
Nah I literally want one just like you have. It's not for doing the paint dude. I will use cans for that. It's for flames and skulls etc. Which are all small (given it's a bike frame).
Being ghost flames it needs to be super low pressure too, so the paint is transparent.
Oh and cheers, it gives me a starting point
you might want a 0.2nozzle then, this one is a 0.35. Mine is a really good one though so you might be good with this
Last edited:
Dicehunter
Resident Newb
Blade Runner desk mat from ali express for £30 including postage, Going to take 3 weeks to get to me but worth it, 900mmx400mm, Difficult to see but it does have sewn edges.
Last edited:
trawetSluaP
Member
Blade Runner desk mat from ali express for £30 including postage, Going to take 3 weeks to get to me but worth it, 900mmx400mm, Difficult to see but it does have sewn edges.
That is awesome!
New monitor has just arrived.
Dell S2721DGF
Dicehunter
Resident Newb
Forgot to mention the Corsair H115i Pro XT I got last month developed a weird ticking sound, I sent it back, Got a refund and bought the NH-D15 Chromax Pure Black, Performance has been amazing, Much better than the Corsair A500 and surprisingly a degree or 2 better than the AIO once heat soak set in, Now just to get the little aesthetic Chromax covers.
Last edited:
g0ggles1994
Active member
Been considering the D15 as my H100i has started developing a weird issue with heating up since I cleaned the machine out and summer's set in. Sodding thing blows the fans at max when the coolant reaches 40ºC and keeps going down and up like a chav revving their CorsaForgot to mention the Corsair H115i Pro XT I got last month developed a weird ticking sound, I sent it back, Got a refund and bought the NH-D15 Chromax Pure Black, Performance has been amazing, Much better than the Corsair A500 and surprisingly a degree or 2 better than the AIO once heat soak set in, Now just to get the little aesthetic Chromax covers.
