PC Failure + Tight Budget = This Build Idea

the heat sink to get is the noctua d14 and the ram to get would be CML16GX3M4A1600C9 Corsair 16GB (4x4GB) DDR3 1600Mhz Vengeance "low Profile" Memory Kit CL9 1.5V
 
that would be a Crucial 128GB M4 SSD - 2.5" SATA-III - Read 500MB/s Write 175MB/s and a WD 2TB 3.5" SATA-III 6Gb/s Caviar Black Hard Drive 7200RPM 64MB Cache
 
Ok. In all seriousness I would suggest that you get the best pre-built custom PC you can buy that will be a good base for you to add GPUs/RAM to later.

Because honestly, you have had many build advice threads and none of them have succeeded. IMO you're not very technically competent when it comes to building PCs and a pre-built rig would really help you.

I am trying to help and not hate.
 
SPS said:
Ok. In all seriousness I would suggest that you get the best pre-built custom PC you can buy that will be a good base for you to add GPUs/RAM to later.

Because honestly, you have had many build advice threads and none of them have succeeded. IMO you're not very technically competent when it comes to building PCs and a pre-built rig would really help you.

I am trying to help and not hate.
Click to expand...

i can build them as to part compatibly it changes daily. i don't live on these kind web sites like my brother did. i built 9 pc's only 1 bad because my brother died and i dint know what components are compatible with what i do. i dint think computer geeks would have such a mightier then though to someone trying to learn.

Cram ty so much for the help and i now have a pc configured for what i want to do. ty so mucj
 
GamerGirlAlice said:
i can build them as to part compatibly it changes daily. i don't live on these kind web sites like my brother did. i built 9 pc's only 1 bad because my brother died and i dint know what components are compatible with what i do. i dint think computer geeks would have such a mightier then though to someone trying to learn.
Click to expand...

Ok, well best of luck with the build.
smile.png
 
GamerGirlAlice said:
i built 9 pc's only 1 bad ... computer geeks would have such a mightier then though to someone trying to learn.
Click to expand...

You've built 9 PC's yet you're trying to learn. I've built 2 and I know how to watercool, install anything, sleeve a PSU, etc.etc...I'm not being, 'high and mighty,' as you seem to think we all are. There is no point configuring a computer you won't be able to built due to lack of cash etc. when you won't be able to build it for ages. All these build idea threads and nothing comes out of them. I'm not saying any more. We've all tried to help out, on several occasions too....
 
want to apoligize for my post in a lot pain from runing around today. my mom was amited to the hospital so i had to wash clothes for her n run around town. i have to go to another hospital tomorow to help with my cronik pain for my lower back blowing out. i need my back fused but cant get it done all i can do is get a epdral of steroids tomorow to relave pain.

anyways like i said im sorry
 
well after resting up a bit im making my final thought for this thread. with me on full disability ill buy universal parts first like hdd's case, prifreals, ect.. may take over a year to build, but it will be a labor of love caring the system to term
 
You must log in or register to reply here.

Similar threads

T
My budget ebay Build
Replies
18
Views
11K
tiagojcp
tiagojcp
U
Any suggestions, trying to keep a build under $800
Replies
8
Views
1K
Snortan
S
S
New Build Advice Needed
Replies
11
Views
6K
NeverBackDown
N
U
Building my Mate a Gaming PC
Replies
1
Views
926
Feronix
Feronix
N
New Gaming build need advice
2
Replies
32
Views
5K
AverageNinja
AverageNinja
Back
Top