AverageNinja
Average Penis Too
1.344 volts is way too much mate, especially for those clocks. 4.5GHz should be achievable at approx. 1.225v.
[OFFICIAL] OC3D Overclockers Club
- Thread starter AverageNinja
- Start date
MrKambo
New member
cant get it stable! ive started with stock settings and tweaked and tweaked so much that i cant find the appropriate descriptive term for it lol!
AverageNinja
Average Penis Too
Very strange :/
Are you OC'ing from the BIOS?
Last edited:
MrKambo
New member
yeah always!! use cpu-z and realtemp as monitoring tools, and IBT Prime95 for stressing and Prime is AVX compatible as well
UkGouki
New member
depends on the cpu my brothers 3770k can do it at 1.250 but my neighbors needed 1.325...
ive had my 3570k at 1.225 4.5ghz but my cooling isnt good enough to keep it there..
MrKambo
New member
i think im one of the unlucky ones, got a bad chip!
AverageNinja
Average Penis Too
Hmmm. Those temps also seem quite high, especially for such a high end motherboard :/
I guess you've lost the silicone lottery.
I think re-doing it and following this video can't be bad though:
http://www.youtube.com/watch?v=mBEeXajbG2o
I guess you've lost the silicone lottery.
I think re-doing it and following this video can't be bad though:
http://www.youtube.com/watch?v=mBEeXajbG2o
AverageNinja
Average Penis Too
IBT is really, really heavy. Your CPU will never be that much loaded. I suggest OCCT or Prime95 for stress testing mate 
UkGouki
New member
IBT is really, really heavy. Your CPU will never be that much loaded. I suggest OCCT or Prime95 for stress testing mate
this i use occt used to only use prime but had some issues with prime on my old board it managed to burn out a memory slot... since then i swier by occt
AverageNinja
Average Penis Too
^^ Indeed
Hope this fixes it and you get out some amazing volts and clocks on your chip mate
Hope this fixes it and you get out some amazing volts and clocks on your chip mate
AverageNinja
Average Penis Too
^^ Now that's better, is it not 
Glad I could help
Glad I could help
MrKambo
New member
^^ Now that's better, is it not
Glad I could help
Cheers mate! Really wanna 5ghz it's for lols, won't get a chance to play with it till tomorrow night but ill keep you guys updated
AverageNinja
Average Penis Too
Looking forward to updates
Master&Puppet
New member
This looks like the right place to have a spreadsheet in post #1 which holds all the data of the members final OCs. Have you got any plans for doing something like that AvNinja?
My current 24/7 clock, Prime95 24hr stable:
4.8GHz @ 1.355 under load. Max temp 66C.
(3570K on z77a-GD65. Delidded and custom watercooled).
M&P
My current 24/7 clock, Prime95 24hr stable:
4.8GHz @ 1.355 under load. Max temp 66C.
(3570K on z77a-GD65. Delidded and custom watercooled).
M&P
AverageNinja
Average Penis Too
I'm currently looking into something like that, with google docs. Will see if it works out, if not, I'll keep myself busy with the OP
MrKambo
New member
Right stable at 4.6 @1.3v cpu-z reports 1.304 on load, 1.312 on idle, temps are ranging from 83-88 on all cores, i know its a little hot but real world usage wont let it get that hot!
also, im 100% sure my gpu's perform better at this clock speed, or is it the placebo effect?
also, im 100% sure my gpu's perform better at this clock speed, or is it the placebo effect?
Master&Puppet
New member
Yea I was going to mention embedding Google docs as a method, forgot to type it though!I'm currently looking into something like that, with google docs. Will see if it works out, if not, I'll keep myself busy with the OP
Would be nice to have all the data in one place, but don't rush it on my account
