OC3D Fractal Design Case Club

That's almost what I want/will do :) but only over the motherboard, because I'll remove the bottom HDD cage, only when I'm rich enough, to get Z77 (or whatever CPU/chipset is newest at the time) board with i7 and watercool the hell out of my case :D
 
TiM! said:
Loving my R4 ...

Not loving the phobya flexlight I got to light it up though
Click to expand...

looks "monolithic" great choice.
yeah, its a choice thing on the LED lighting.. some are too bright, dull, flood..
but you'll find that right look!

IliaLo said:
That's almost what I want/will do but only over the motherboard, because I'll remove the bottom HDD cage, only when I'm rich enough, to get Z77 (or whatever CPU/chipset is newest at the time) board with i7 and watercool the hell out of my case
Click to expand...

doesnt have to be watercooled to nix the cages, unless you gotz them loaded with drives..
whip that side panel in there and show it off.. if you need to remod the panel, pop the 'glass out and recut.
 
Last edited:
Here is my R3 from last year, unfotunatley im no longet the owner but loved the case to bits..
 

Attachments

  • Untitled_1[1].jpg
    Untitled_1[1].jpg
    86.9 KB · Views: 125
  • IMG_0386[1].jpg
    IMG_0386[1].jpg
    72.7 KB · Views: 116
  • IMG_0389[1].jpg
    IMG_0389[1].jpg
    58.3 KB · Views: 93
  • IMG_0390[1].jpg
    IMG_0390[1].jpg
    63.1 KB · Views: 97
I'll be posting som pitcures of my system when I get time for it and make it look good as well! :) Nice pictures people!
 
Arc Midi owner here.

Only have a picture of the front because my camera stinks and am currently doing some mods.

image-1_zpsd62e068e.jpg


My to do list:

-Get carbon fiber and wrap my PSU and the 5.25 bay
-Buy the 700 series when it comes out
-Get some NF-A14 FLX fans
-Make a window side panel with some smoked acrylic
-Sleeve or get PSU cable extensions

A lot of stuff to do on such an amazing case. Cannot wait!
 
ZeVo said:
Arc Midi owner here.

Only have a picture of the front because my camera stinks and am currently doing some mods.

My to do list:

-Get carbon fiber and wrap my PSU and the 5.25 bay
-Buy the 700 series when it comes out
-Get some NF-A14 FLX fans
-Make a window side panel with some smoked acrylic
-Sleeve or get PSU cable extensions

A lot of stuff to do on such an amazing case. Cannot wait!
Click to expand...

welcome to the club.

you might wanna try to move the rear exhaust fan or roof fan to the lower
front fan spot. aids in more air intake and cooler interior temps for a stock fan. it'll help temporarily since your fan shopping..

applaude the vinyl wrap and window mods... and again welcome to the club.
 
Hello all. Short time reader, first time poster. After months of planning, researching, and saving, I finally got my first personal rig built. Here's the specs so far:

Case: Fractal Design R4 Pearl Black, window
CPU: i5 3570K
Mobo: AsRock Z77 Extreme4
PSU: SeaSonic X650 80 Plus Gold
Cooler: Corsair H80i
RAM: Corsair Vengeance 16GB
SSD: Samsung 840 Series 250GB
HDD: Seagate Barracuda 2TB
ODD: LG 14x Blu-ray burner
Monitor: AOC 23" LED

I still need to work out what GPU to go with (torn between a HD 7850 and a GTX 660) and whether or not to add LED lights to the inside (it currently sits on the side of my computer table, so it isn't seen that much, unless I look under there). Here's how she looks so far:

2013-01-17%2B00.12.19.jpg


13%2B-%2B1


13+-+2


Once I get some black SATA cables (or run come Tek-Flex over the current ones) and get the GPU I'll probably pull the center drive bay. The other HDD is from my old computer, currently there to pull files and programs. I may pop another 2TB drive in and run it as a RAID, but haven't decided. The SSD is in the back, as it shouldn't need to be bothered for some time. Debating on changing the fans on the H80i to some high pressure PWM fans, but it's more want than need.

Overall, I'm quite pleased with the build. It's cool, it's clean, it's quiet, it's powerful , and it's mine. For further thoughts, please feel free to ask.
 
Last edited by a moderator:
Assume said:
Owner of the Define R4. I love the case.
Current specs are listed in my signature.
Click to expand...

spenzalii said:
Hello all. Short time reader, first time poster. After months of planning, researching, and saving, I finally got my first personal rig built. Here's the specs so far:

Case: Fractal Design R4 Pearl Black, window
CPU: i5 3570K
Mobo: AsRock Z77 Extreme4
PSU: SeaSonic X650 80 Plus Gold
Cooler: Corsair H80i
RAM: Corsair Vengeance 16GB
SSD: Samsung 840 Series 250GB
HDD: Seagate Barracuda 2TB
ODD: LG 14x Blu-ray burner
Monitor: AOC 23" LED

Once I get some black SATA cables (or run come Tek-Flex over the current ones) and get the GPU I'll probably pull the center drive bay. The other HDD is from my old computer, currently there to pull files and programs. I may pop another 2TB drive in and run it as a RAID, but haven't decided. The SSD is in the back, as it shouldn't need to be bothered for some time. Debating on changing the fans on the H80i to some high pressure PWM fans, but it's more want than need.

Overall, I'm quite pleased with the build. It's cool, it's clean, it's quiet, it's powerful , and it's mine. For further thoughts, please feel free to ask.
Click to expand...

thank you to both of you for posting your builds and rig pix.

Assume, you might wanna list your specs from your signature.
things change and your post won't make since if the sig changes..
awesome hardware.. please keep us posted or complete a rig gallery or build
log and link from here to it..

spenzalii, see what some planning and reseach can do.. great build so far..
please keep us posted or complete a rig gallery or build log and link from
here to it..

OC3D loves to have their member create a Rig Gallery thread to post your
ideas of how the rig/build can be.. love it!
 
airdeano said:
yes, but get that finger repaired.. i hate having to shake someones hand in
chem/cut gloves! LOLOL

awesome vantage.. tell me this... got stock in Noctua? LOL
fabulous fans!
welcome to the club
Click to expand...
Finger is much better now. I cut it twice in the same spot! I'll do whatever it takes to get it to look nice! :lol:

And I wish I did! I love all their products. I do not care what color they are.

And thank you very much!
 
Just got an R4 from last christmas and after seeing the H220 able to fit in the roof. i seriously cant wait to get one and do my frist wc build(actually first build in general because i never built a computer before) :)
 
NeverBackDown said:
Just got an R4 from last christmas and after seeing the H220 able to fit in the roof. i seriously cant wait to get one and do my frist wc build(actually first build in general because i never built a computer before) :)
Click to expand...

congrats, snap a pic or two and join the club.. start a build log or rig gallery
thread.
 
You must log in or register to reply here.

Similar threads

B
Case Labs, the case I cannot escape from.
Replies
3
Views
4K
Bartacus
B
A
Fractal Design Define C - An OC3D Themed Case Mod
Replies
6
Views
8K
WillSK
WillSK
tinytomlogan
Fractal Design Node 202 ITX Case Review
Replies
8
Views
4K
Dawelio
Dawelio
tinytomlogan
Fractal Modding Competition
12 13 14
Replies
260
Views
71K
tinytomlogan
tinytomlogan
R
Antec P183 or Fractal Design Arc Midi V2?
Replies
0
Views
797
R2-D2
R
Back
Top