PBaines
New member
First of I would like to say a BIG BIG thanks to my sponsors at the moment. Which is NZXT and Corsair
NZXT were kind enough to sponsor me a Phantom 410 case.
Corsair were also very helpful in sponsoring me an AX850 PSU!
This will be a project done over a few months, as I would like to see if I an arrange any more sponsors to take part in this!
www.nzxt.com
www.corsair.com
But the main plan of this is:
I want the end result for someone to see and say to me "Wait, what case is this?" Because I am about to turn this case into something no one has seen before
Clue: Watercooled, 360mm Rad, 240mm rad... All internal
lets see where this takes us!
So, today I spent some time doing drilling.... no modding so far !! All I have done is drill out the rivets, and then screw in the radiator!
I wonder what this will be
Something that I love about this case. Is that there is correct spacing for a rad !! unlike the Switch 810. It easy enough to resolve on the Switch, but knowing there is one less thing you have to change. Its a little soothing!
As we can see. The case looks like it has been designed to hold a 360mm radiator !!
To come: 240 rad will be here, is a 30mm thick one, which will hav e the fans inbetween the metal and plastic top, no room underneath for push pull. Even if there was, I would rather the case look nicer, than to have something that would increase performance by < 2c
Just enough room to fit an EK res
SWEET! and yes, have thought cablemanagement holes
dont you worry
Note: I will be connecting the radiators together, with no tubing, that is why the fittings i have used are there,
The Rad i will be using is this one !
NZXT were kind enough to sponsor me a Phantom 410 case.
Corsair were also very helpful in sponsoring me an AX850 PSU!
This will be a project done over a few months, as I would like to see if I an arrange any more sponsors to take part in this!
www.nzxt.com
www.corsair.com
But the main plan of this is:
I want the end result for someone to see and say to me "Wait, what case is this?" Because I am about to turn this case into something no one has seen before
Clue: Watercooled, 360mm Rad, 240mm rad... All internal
So, today I spent some time doing drilling.... no modding so far !! All I have done is drill out the rivets, and then screw in the radiator!
I wonder what this will be
Something that I love about this case. Is that there is correct spacing for a rad !! unlike the Switch 810. It easy enough to resolve on the Switch, but knowing there is one less thing you have to change. Its a little soothing!
As we can see. The case looks like it has been designed to hold a 360mm radiator !!
To come: 240 rad will be here, is a 30mm thick one, which will hav e the fans inbetween the metal and plastic top, no room underneath for push pull. Even if there was, I would rather the case look nicer, than to have something that would increase performance by < 2c
Just enough room to fit an EK res
Note: I will be connecting the radiators together, with no tubing, that is why the fittings i have used are there,
The Rad i will be using is this one !
