wrenaudrey
New member
Very nice and neat build.rads too.
Sry guys !! XDD
How did you attach the res like that?
Whats that use of that one near the pump/bottom of res, that seems to not be attached to anything?
NZXT 810 Watercooled
- Thread starter haritz85
- Start date
How did you attach the res like that?
Whats that use of that one near the pump/bottom of res, that seems to not be attached to anything?
This is what I use to drain the loop.
Some more Pics. I finally got primochill Advance LRT transparent tube and some Mayhems pastel Ice White. I also painted Nidec GT fans and fan controllers.
wrenaudrey
New member
Did this come in the pack with the tube res?
The bottom part of the res, I presume where the pump is, what's the name for that, exact name please.This is what I use to drain the loop.
And couldn't you have connected the pump box and res together so it's all one big unit?
That drain bit, what's that one called where it has a valve/switch?
Sorry im really a newb at WC but I want to try it with my system.
I have exactly the same case as you and im most probably going to copy your set up lol
If you don't mind :lol:
jamesriley94
New member
That's a pump top.
Depending on the model, this is basically the same:
http://www.specialtech.co.uk/spshop...Top-for-Laing-D5-Pumps--Acetal-pid-15340.html
Did this come in the pack with the tube res?
Yes with 2 of them.
The bottom part of the res, I presume where the pump is, what's the name for that, exact name please.
It's a top for d5 pump
And couldn't you have connected the pump box and res together so it's all one big unit?
Maybe, but I already bought the acetal top for the D5 pump so I wouldn't spend more money on that. Just added a bitspower male/male adapter and worked fine
That drain bit, what's that one called where it has a valve/switch?
if you zoom in the end of fitting+valve you'll see it.
Sorry im really a newb at WC but I want to try it with my system.
I have exactly the same case as you and im most probably going to copy your set up lol
If you don't mind :lol:
I don't mindl, don't worrybut just an advice. I you are going to place a rad at bottom of the case try to buy it with 4 holes. Use 2 of them for the loop, another one to put the valve (lower part) and the last one just closed. It will be easier for you to drain it.
And also a res with 2 holes at the top. One for the loop and the other one to fill it.
Thanks Noz.
Bonus pics hehe
Last edited:
alpenwasser
New member
The 5.25" bay area is a bit too busy for my tastes (too many knobs and display numbers and stuff),
but that's just my personal taste. I do like the bottom cutout for the fans as well as the insides,
nice work I'd say.
but that's just my personal taste. I do like the bottom cutout for the fans as well as the insides,
nice work I'd say.
AverageNinja
Average Penis Too
Oh no you didn't! You've just put together my dream rig! D:
I'm properly jealous and I like your build. Colourscheme reminds me of L3P's Parvum Build (UV Green).
I'm properly jealous and I like your build. Colourscheme reminds me of L3P's Parvum Build
(UV Green).
S_I_N
New member
I was like ok to much white but then you did that green and while like others have said not a fan of UV you sire have pulled it off nicely. Very nice build.
oh and I noted you said you have 2 fan controllers cause you have 11 fans. Thats funny I have 13 fans in my 810 build but still only one controller
and I'm working on removing that lol. I got 2 of the swiftech 8fan pwm blocks. Tried them with my non pwm fans and well that didnt work so when I replace them with pwmer I'll put them back in and allow the mobo to control fan speed and then maybe i can put the hot swap back on or something lol.
oh and I noted you said you have 2 fan controllers cause you have 11 fans. Thats funny I have 13 fans in my 810 build but still only one controller
and I'm working on removing that lol. I got 2 of the swiftech 8fan pwm blocks. Tried them with my non pwm fans and well that didnt work so when I replace them with pwmer I'll put them back in and allow the mobo to control fan speed and then maybe i can put the hot swap back on or something lol.I was like ok to much white but then you did that green and while like others have said not a fan of UV you sire have pulled it off nicely. Very nice build.
oh and I noted you said you have 2 fan controllers cause you have 11 fans. Thats funny I have 13 fans in my 810 build but still only one controller
Thank you and yeah, too much fan controllers lol. I didn't know I could connect more than one fan per channel so...I bought two of them ahaha.
