New Members: Post your introduction!

hey everone

hey my name is matt i go by evgapcgamer im new 2 this site im also part of tek syndicate forum also im new 2 pc building and new 2 pc gameing im comeing from ps3 but im really likeing pc gameing alot more
 
Hi to all. My name is Marin, nicknamed MaKo and i have been around here (this site i mean) for about two weeks and just now i found out that i missed the introduction on day one....so here it is.

good evening to all
 
Hello Everyone. I am an expert in scientific review, and research. My nickname is the walking encyclopedia. I know a little bit of just about everything. My specialties are Chemistry, Physics, Development. I love computers and i love overclocking, modding anything i can get my hands on, even my router is overclocked. Hello from indiana, The Patriot State of Shooting stuff, Blacksmithing, and CORN. yea. EXCITING, no not really.
not much to do here
someone help.
 
Standard introduction. My name is Aaron, go by SysMunky (or in this case SysMonkey) I built my first gaming rig in February 2012, then had to sell the beastie as parts after being unemployed. Now that I've got things back in order, I'm eagerly plotting my next build, and hoping to make it something that I couldn't even consider selling.
 
Hello all!

I am super excited to be here today. My friend built my first custom pc. Without knowing anything about this stuff, well.... I watched. Shortly after watching I decided I wanted to upgrade and change some stuff. First I changed my case as I had a mid size tower. Totally not happy with that, it was so small, plus there was a damn rats nest of wires inside my cpu. Also, due to my heatsing being jubungous it was almost pressed against the side of the case. So while I didn't entirely build this thing, I did the case swap, also changed to a EVGA GTX 770 SC from a 660 and added a 800w power supply rather then the 600 I had before.

Here are my specs:
AMD FX 8150 Processor 3.8ghz
16gb of ram (don't recall what was picked, but I do believe it isn't the higher clocked ram. Also I am way new and am not sure if I am using the right lingo).
EVGA GTX 770 SC
800 Watt Power supply
Thermaltake Frio Overclocking ready heat sink

I also want to over clock my cpu but I have no idea what I am doing. Sooooo, just kinda letting it sit at 3.8ghz

Best
NasMan
 

Attachments

  • 1421240_10153497462730089_348995376_o.jpg
    1421240_10153497462730089_348995376_o.jpg
    105.2 KB · Views: 54
Hi

I`m Lee and I`ve been a gamer since the 70`s. I always build my own PC`s and love the cable management side of it. Probably why I`m single :)
 
Hi all,

I'm Dave from Nottingham UK, long time lurker and first time poster.

Planning a massive upgrade of my current rig in the very near future - when I mean massive I'm going from a Phenom II 955 and a single 5850 to an i7 4770K and dual 290X, so yeah that kind of massive. It'll also be my first watercooled build after being a long term aficionado of air cooling.

Anyway, I'll post my spec up in the WC forum and see what the gurus on here think!

Cheers all :)
 
Hello everybody im newish to this forum stuff. I have been modding for years now and am currently building my version of a borg cube (will post build pics in appropriate forum when completed) and looking into water cooling with refrigeration. (I dabble in some power engineering as of late lol)
Any thoughts?

My sys specs are as follows:
ASUS ROG crosshair V formula_Z
AMD 8320 @ 4.2 @ 1.35v ( 230 * 18.5)
AMD 7850 (xfx) @ 1050/1450
Corsair Vengeance 1600 @ 923.2 MHz
Kingston Hyper X 240 gig ssd
WD Green 3T hdd
Corsair 600T
proc and vid card custom water loop with custom Rads.
 
Hello, My name is TANGO. Been browsing the forums and watching TTL's videos over the past year and a bit and finally sacked up and signed up. Good day!
 
Hello everyone,

I have been reading articles on Facebook and forum/website for a little while now and thought it's time to get more involved, so here I am :) I'm new to overclocking and case modding but this forum seems like a great place to learn.

Anyway greets and best wishes to everyone, and see you on the forums!
 
Hi there ppl my name is richard i have been makeing pc,s out off old part for about 8 years i also am a gamer and like to no what parts will make a good gaming pc
 
Hi all! My name is Julien, I've been following TTL vids since 5 years I think, so today I decided to subscribe here too. I'm 30, from France, I love to build computers since 10 years for family friends and myself of course. I 've never tried to build a rig with full loop of watercooling, I'm planning a big upgrade this year so I hope you mates will help me :). My actual rig is AMD based, Phenom II 965 C3 on a Crosshair IV Formula Board, 8 Gigs of G skill sniper 12800 CAS 9, an Asus Matrix Platinum R9 280X, BeQuiet! Dark Power Pro P7 1200W ( I know -_-' it s too much), an OCZ Vertex 2, 4 WD Caviar Black 1To in Raid, all fitting in a 750D from Corsair, Cpu cooled by a H100i. Well i think i'm talking a little bit too much for an introduction so i will come to you soon to help me for an intel based upgrade :). Take care !
 
Hello and a big welcome to you all :)
Try and be as active as possible, play nice, and, people will play nice with you.

Regard's
mArTyN
 
Last edited:
Thank you Martyn, I hope I'll be able to be as active as possible, currently spending holidays with family but I'll come back home in the first week of january, i'm missing my rig so much :p
 
You must log in or register to reply here.

Similar threads

Dawelio
New forum layout
Replies
2
Views
712
Dawelio
Dawelio
J
Is LTT forum is choke full of spooks ?
Replies
5
Views
484
hmmblah
hmmblah
WYP
Wyp's new News Rig with a Classic OC3D Enclosure
Replies
8
Views
2K
WYP
WYP
WYP
OC3D No Man's Sky Thread
Replies
16
Views
4K
SuB
SuB
madness777
A story worthy of a Thread?
Replies
3
Views
3K
Excalabur50
Excalabur50
Back
Top