Need some Help to get 4Ghz or lower

[MLWALK3R]

My Spec

MSI P55 GD 80,Latest bios

I5 760@2.80Ghz

4 - 2GB, Corsair XMS,1600mhz 9-9-9-24 1.65 " For any one who care's Part Number CMX4GX3M2A1600C9 "

cooler H50

500w Psu Corsair

Please tell me what am doing wrong, or what am not doing, give me as much advice

BIOS Pics of what i set.

 

[kilobravo]

Disable XMP,set 1600mhz, memory timings and volts manually.

No vdroop

Intel eist disabled

C1e disabled

Dram voltage is to high,set 1.65v. And start with two ram-sticks only in slot A1 and B1,no one in A2-B2.

Cpu vtt,start with 1.3v and add a nudge or two if unstable.

Cpu voltage is a little to high also for 4.0ghz.Start at 1.28v and add a nudge or two.Should be stable before 1.35v.

Cpu pll,1.82-1.88v.

Load line calibration(LLC) enabled at high.

 

[MLWALK3R]

Disable XMP,set 1600mhz, memory timings and volts manually.

No vdroop

Intel eist disabled

C1e disabled

Dram voltage is to high,set 1.65v. And start with two ram-sticks only in slot A1 and B1,no one in A2-B2.

Cpu vtt,start with 1.3v and add a nudge or two if unstable.

Cpu voltage is a little to high also for 4.0ghz.Start at 1.28v and add a nudge or two.Should be stable before 1.35v.

Cpu pll,1.82-1.88v.

Load line calibration(LLC) enabled at high.

Nice one m8 but my systems keeps freezing at 4GHZ & 3.8Ghz. Also my bios does not have an off setting for Vdroop and there is no Load line calibration in my BIOS. set every as you sed ,tweak it here and there and nothing.

 

[kilobravo]

Select VDroop control,hit enter and a flipdown menu should appear,select no vdroop or low vdroop.

If that dont work,it should adjust using + or - on keyboard.

A bios update may be needed.Could improve stability.

Try one ram-sticks at a time.Maybe you have a faulty one.

You may also have lost in the chip-lottery

 

[MLWALK3R]

Select VDroop control,hit enter and a flipdown menu should appear,select no vdroop or low vdroop.

If that dont work,it should adjust using + or - on keyboard.

A bios update may be needed.Could improve stability.

Try one ram-sticks at a time.Maybe you have a faulty one.

You may also have lost in the chip-lottery

RAM is Fine, think ive just lost the lottery TBH.There is only low & high Vdroop in my bios also it the latest what is out, Thanks any way, ill just wait for the FX Chips to come out