My X2 4400+ 24/7 Settings

[imported_Bazza]

well, this is my day-to-day PC, with everything at stock, and working fine..

not as impressive as a COnroe or Kentsfield, but its still fine.

 

[K404]

I`d call that a sensible start Aim at 2400 I reckon ya can do it!

 

[imported_Bazza]

give it ago now..... give me 10 mins....

 

[stocky]

10 mins up...

 

[imported_Bazza]

there you go...

i'll have a go on BF2 And see if its all Ok-

 

[stocky]

Nice - did you have to up any voltages at all?

 

[imported_Bazza]

nope... still fine....

may have a crack at 2.5Ghz....

 

[stocky]

That's good for all stock!

Keep pushing until you find an instability

 

[imported_Bazza]

still all at stock....

 

[imported_Bazza]

ahh insibiltily, my worst friend....

seems all fine..

just running some music and encoding a couple MP3's and its all hunky dorey...

 

[stocky]

Perhaps try some Prime95 or similar software to ensure full stability

 

[fatty]

Nice setup

 

[maverik-sg1]

usually the cpu will do 225Mhz on stock volts - If you are using a DFI board and your ram is rated higher (PC4000 or PC4400) you could also try using the RAM multiplier function for a free bost in power

 

[imported_Bazza]

well, its all gone a bit p**y.....

i started it up earlier at 2.45GHz, and then had a go with 2.5 (228 x 11 @ 1.375v) and i couldn't get it too boot....

so now back at stock.....

for now.....!!

 

[sacha35]

Try burnning in as this will help a bit with the amount of volts needed to run at higher speeds.

 

[Firelord]

Was that with ram 1:1 or with a divider? try the 166MHz mem dividier

 

[imported_Bazza]

i think its running at DDR-333.....

didn't chnge anything, so i think the Mobo did it its self....

 

[imported_Bazza]

well, ive just had a huge crash and had a bout 10 of being unabloe to boot at 2200mhz-

ive dropped it down to 2000Ghz and it booted, then managed to get it back upto 2.2Ghz, but its not being very stable...

 

[Firelord]

What BIOS are you using for the board?

 

[Firelord]

Oh and stepping as well please of the CPU? What cooling are you using?