My completed rig.

[photekq]

At the picture you have not mounted all the screws to your case that holds the GPU. And the cables from the H100 is a mess to get right, if you have them at the side of the heatsink at the motherboard it should be fine (i can se you did). Very nice rig

Dang, I didn't realise that. I was swapping the cards around a lot and must've forgotten. Thanks!

i love this build, i think it looks great.... Love the case!!! the only thing i can say i dont like about it is the DVD drive... thats it!! lol

Thanks man. I'd take the DVD drive out if it weren't in use. Those cables are annoying me too.

Very nice mate . You can buy a cable that clips onto the gpu then up to the top of the case just like Fredex's idea . I can't rember for the life of me the name right now , i'm sure it will come to me .

Thanks. I'll have a look into this cable and see if I can find it.

 

[Rich_]

those 560ti's in x2 should get you right around single 680 performance right?

 

[paulstung]

Thanks. I'll have a look into this cable and see if I can find it.[/QUOTE]
I remembered what it is called mate . It's the Skythe Ninja wire.

http://www.dvhardware.net/article36847.html

 

[remember300]

thats an awesome idea. do they do 1 line that has 2 hooks near each other so you could use one cable for 2 gpus

 

[photekq]

those 560ti's in x2 should get you right around single 680 performance right?

The 560s perform great. They completely max bf3 - all ultra, all highest anti aliasing and all driver settings put on quality.

Thanks. I'll have a look into this cable and see if I can find it.

I remembered what it is called mate . It's the Skythe Ninja wire.

http://www.dvhardware.net/article36847.html[/QUOTE]
Thanks man

 

[remember300]

are your 560's 1gb or both 2gb?

 

[photekq]

are your 560's 1gb or both 2gb?

They are both 1.28gb cards.

 

[remember300]

oh right do you think i could use a 1gb and a 2gb version of the same card in sli

 

[photekq]

oh right do you think i could use a 1gb and a 2gb version of the same card in sli

I'm not sure, although I don't think it's a recommended approach.

 

[remember300]

i know the gpus are a match was just wondering about the vram if that would affect them

 

[iBeInspire]

oh right do you think i could use a 1gb and a 2gb version of the same card in sli

You can, but both will use only 1gb each - Remember, that still means you'll only have 1gb useable in game since both GPUs need to have the same vRam information

 

[remember300]

ah so id have to get another 2gb card then to notice a performance increase

 

[iBeInspire]

ah so id have to get another 2gb card then to notice a performance increase

Not necessarily, SLI'ing them would still give you a boost, but your current card will basically drop to a 1gb - @1080p most of the time even with that you'd be ok, but with high levels of AA and anything above 1080p, you definitely want more than 1gb.
If your sure you wanna SLI, should try and find a 2gb model, that way your card's extra vram wont go to waste

 

[remember300]

or should i just wait for a nvidia 7xx or pos get a 670 or 680 i run at 1920x1080 i run crysis 2 at max and hit upto 80fps but then drop to around 30 when it gets intensive i also want to run crysis 3, i need the excess ram for skyrim and soon to be multi monitor along with my 3d modeling software is a little power hungry

 

[iBeInspire]

or should i just wait for a nvidia 7xx or pos get a 670 or 680 i run at 1920x1080 i run crysis 2 at max and hit upto 80fps but then drop to around 30 when it gets intensive i also want to run crysis 3, i need the excess ram for skyrim and soon to be multi monitor along with my 3d modeling software is a little power hungry

I'd wait (and AM Waiting ) for the next gen cards
What you've got right now is very decent, and should last you till the new cards come out...
All depends on your financial situation TBH, If you've got the money - why not shell out on a 680

 

[iBeInspire]

And now we should probably stop thread jacking before some admins see *Hides*

 

[remember300]

ah thats true sorry, His rig just inspired me