Mach II GT & P4C800E-Dlx

[Cashman]

My GT shows evap temps of -62.c yet my Asus Probe shows -32.c ??

Is the Asus Probe reading it correctly or is the sensor probably mounted too close to the heating elements on the CPU mounting kit and hence its giving a warmer readout?

Or have I not mounted the evap head well enough to get 100% contact with the CPU?

Cheers guys

 

[boardy]

The evap temp will always be lower because the probe is stuck inside a big copper block (evap), whereas the board temp is taken from under the processor, and is not in DIRECT contact with the evap itself.

Those temps look fine mate.

Boardy