Kaapstad
Active member
I am nowhere near as good at building PCs as some of the people who posted here but here is a few pics of my 4930k/290X setup.
Project name: "Paint it Black"
Specs
Case: 900D
CPU: 4930k
GPUs: 4 x 290Xs
Motherboard: RIVE BE
RAM: Corsair Dominator Platinums 9-11-11-31 @9-11-11-25 1T 96
CPU waterblock: XSPC
Pump/res: XSPC Twin D5 Dual Bay Reservoir/Pump Combo
PSU: Corsair 1200i x 2
GPU waterblocks: EK Water Blocks EK-FC R9-290X - Acetal+Nickel
GPU backplates: EK Water Blocks EK-FC R9-290X Backplate - Black
Rads: MO-RA3 420 PRO black x 2
Fittings: Monsson and Koolance
It still needs a bit of tidying up.
Below is some pics of the build from the beginning.
Well here's the case, it's quite big but not as large as a LD V8. The case behind in the pic is a 800D with my GTX 690s in it.
Some screws etc.
Some PSUs
That's better
Yet more fans
In with the mobo
CPU fitted
And on with the block
Some tubing
Some rads, not even a 900D will take these.
Here is one of the rads with it's 9 x 140mm fans fitted.
With the grill in place.
The rads filled and ready to go, just add PC.
Corsair Dominator Cas 9 2400mhz
Suddenly this case is not looking so roomy with four GPUs in it.
Some cabling
Finally got some water onto the cards.
Some more pics with the mid plate in
Project name: "Paint it Black"
Specs
Case: 900D
CPU: 4930k
GPUs: 4 x 290Xs
Motherboard: RIVE BE
RAM: Corsair Dominator Platinums 9-11-11-31 @9-11-11-25 1T 96
CPU waterblock: XSPC
Pump/res: XSPC Twin D5 Dual Bay Reservoir/Pump Combo
PSU: Corsair 1200i x 2
GPU waterblocks: EK Water Blocks EK-FC R9-290X - Acetal+Nickel
GPU backplates: EK Water Blocks EK-FC R9-290X Backplate - Black
Rads: MO-RA3 420 PRO black x 2
Fittings: Monsson and Koolance



It still needs a bit of tidying up.
Below is some pics of the build from the beginning.
Well here's the case, it's quite big but not as large as a LD V8. The case behind in the pic is a 800D with my GTX 690s in it.

Some screws etc.

Some PSUs

That's better

Yet more fans

In with the mobo

CPU fitted

And on with the block

Some tubing

Some rads, not even a 900D will take these.

Here is one of the rads with it's 9 x 140mm fans fitted.

With the grill in place.

The rads filled and ready to go, just add PC.

Corsair Dominator Cas 9 2400mhz


Suddenly this case is not looking so roomy with four GPUs in it.


Some cabling

Finally got some water onto the cards.




Some more pics with the mid plate in



Last edited: