Help with RAM speed and voltage
- Thread starter Luger718
- Start date
manually.... think xmp will make a difference? ill give it a try
Please dont use xmp,manually settings is always best.Could be a faulty stick,try memtest,one stick.
stress testing now....stock bios settings...only changed memory timings and voltages to specc.....and updated bios to latest beforehand
Bios update may do the trick
im hoping it does.... about to hit the 10 mins mark this is usually where it froze up/BSOD
if it lives i will run it for an hour and then do some gaming
if it doesnt ill probably run memtest tonight...... can i run both sticks over night or does it have to be 1 at a time?
1 at a time to start with,we are trying to eliminate faulty ram or if its ramslots thats faulty.
ahh ok didnt think of the ram slots....although i did try to move the ram to the two other slots a few months ago when i was trying to troubleshoot it.... and it still froze up/BSOD
just hit the 20 min mark
i think this set just got passed QC without being able to run at specc.....ill run memtest tonight though
It wont hurt,but i run all mine at 1.64-1.65v without any problem.
Cant remember how long a pass takes,but 2-3 hours run is more than enough in my opinion.
Almost done with the fourth pass on first stick no errors..... Luckily my shows are on
If one stick has errors I would have to send both stucks in right? If that's the case ill wait till I buy 8GB more its so cheap now only USD 65ish)
OT: you guys in the UK have The show Breaking Bad?
If one stick has errors I would have to send both stucks in right? If that's the case ill wait till I buy 8GB more its so cheap now only USD 65ish)
OT: you guys in the UK have The show Breaking Bad?
