Help and hand holding required (:

[zx10rc1]

Hi,another noob.

Im trying to overclock my system but cant get passed 2.6 ghz.

Ive tried everything and need help please

OS = Vista 32 bit

Case = Cooler Master Centurion case

PS = Thermaltake Toughpower 650W

CPU = Core 2 Duo costa rica E6600 2.4GHz-4MBcache-socket LGA775

Cpu cooling = OCZ Vendetta CPU Cooler Socket 92mm Fan kit

Temp = Via nvidia monitor = cpu 37c system = 41c (temptaken as i write this with nothing else running)

Mobo = ASUSTeK P5N32-E SLI PLUS

Bios = 1002 (latest)

RAM = 4 X DDR2 Corsair xms2 6400 c5 800mhz

Harddrives = Twin 35gig raptors in raid-o

Graphics = 2 x NVIDIA GeForce 8800 GTS in SLI

Temp = Via nvidia monitor = gpu 64c gpu2 = 72c (temp taken as i write this with nothing running)

Sound = Onboard DirectSound Version 6.0.6000.16386

Screen = SyncMaster 206BW,SyncMaster Magic CX206BW (Digital) 3000 : 1 contrast ratio

Overclocked as follows............

Using Ntune on coarse tune

cpu core= 2610

fsb=1164

mem=873

spp & mcp pci-e = 2850

Temps = cpu - 42c system- 46 hardgaming (using nvidia moitor)

gpu core = 576 to 619 (done manually by keeping the nvidia monitor and keeping the values with a green square (if i increase values higher it turns to red)

gpu mem = 837 to 924

 

[Toxcity]

First off ol' bean, lets stop using Ntune.

If you venture into the bios you will come across "Extreme Tweaker" have a muck about in there.

You should be able to get that thing much higher than 2.6Ghz.

The motherboard you have is an awesome board for overclocking Dual Cores.

Check out this for more help.

 

[Pat123]

Isnt that an 680i board? They dont clock high but you should be able to make 2.8-3.0Ghz..

Like tox said, go into the bios at boot, and change your fsb etc..

 

[Hatman]

4 dimm modules occupied with halt overclocking a bit but you need to increase FSB voltage and cpu voltage to overclock.

 

[zx10rc1]

Hi guys

(Are these results any good and safe?)

Done loads of testing, let me know if im missing something please……………….

Temps

MB Temp = 42c

CPU Temp = 39 to 42 c (as i type this with nothing running)

GPU at 640/1050 and CPU at 3218 1.45volts. Ram set to = 880 with 3gig (no latency’s adjustments) unlinked with fsb set at =1430 = 13616 3DMarks06

GPU at 640/1050 and CPU at 3218 1.425 volts Ram set to = 800 with 4 gig(no latency’s adjustments) unlinked with fsb set at =1430 = 13791 3DMarks

GPU at 640/1050 and CPU at 3333 1.425 volts Ram set to = 800 with 3 gig (no latency’s adjustments) unlinked with fsb set at = 1480 = 13918 3DMarks

LAST AND FINAL

GPU at 640/1050 and CPU at 3375 1.425 volts ram set to = 800 with 3 gig (no latency’s adjustments) unlinked with fsb set at =1500 = 14155 3DMarks

RIG AS FOLLOWS

OS = Vista 32 bit

Case = Cooler Master Centurion case

PS = Thermaltake Toughpower 650W

CPU = Core 2 Duo costa rica E6600 2.4GHz-4MBcache-socket LGA775

Cpu cooling = OCZ Vendetta CPU Cooler Socket 92mm Fan kit

Mobo = ASUSTeK P5N32-E SLI PLUS (650i)

Bios = 1002 (latest)

RAM = 3 X DDR2 Corsair xms2 6400 c5 800mhz

Hard drives = Twin 35gig raptors in raid-o

Graphics = 2 x NVIDIA BFG-GeForce 8800 GTS in SLI 320Mb

580/850 clocked to 640/1050

Please not I have not touched ram settings,not sure what to do but hoping the “unlinked setting” and auto showing 800mhz is ok ?

Any thoughts?

 

[Pat123]

what you monitoring temps with?

 

[zx10rc1]

You were right about 4 dimm,had issues at 3ghz,reduced by one

Thanks

 

[zx10rc1]

Hi

Using Pcprobe and speedfan and temps monitor in bios.

But im still worried because im a noob and am usure of what the temps should be.

Psprobe and speedfan are both showing cpu 41c and mb 41c as i type this.

 

[Phoenix]

Isnt that an 680i board? They dont clock high but you should be able to make 2.8-3.0Ghz..

Like tox said, go into the bios at boot, and change your fsb etc..

The P5N32 SLI PLUS is a 650i-board.

 

[nepas]

its a hybrid board 650i n/b, 570sli s/b,nice clocks so far mate,shame that board dosnt like quads

 

[KevinFlys]

Benefits of Becoming a Member

Can you simply tell if Runescape is a great game maplestory powerleveling or not without you becoming a member? The answer to that would be, NO! Well you can make a few predictions about Runescape and see the moral of the game when being a regular user and not a member but becoming a member brings a whole lot of additions to Runescape that you would never see if you were not a member. Being a member of Runescape has so many benefits and I will try to list them all here for you. Runescape tells you them, but I'm going to detail it a few features for you here. runescape money