Ham's SS Build Log **56k**
- Thread starter Ham
- Start date
Well good news and bad news.
Bad news, my stupidass pos car is broken again. =savings down the drain
.
Delay of god knows how long till i can get my vac pump, manifold & Evap metal.
Ham is not impressed.
Good news:
Units all done bar the evap. Will see if i can scrim a copule of £ to get the metal soon...
Bad news, my stupidass pos car is broken again. =savings down the drain
.Delay of god knows how long till i can get my vac pump, manifold & Evap metal.
Ham is not impressed.
Good news:
Units all done bar the evap. Will see if i can scrim a copule of £ to get the metal soon...
Very good minus a few things that can be improved... First off, vibration will not be good with those little straps around the suction line. Unless you plan to remove thos when you insulate. ALso with the capillary, run it straight across the suction to the very end and wrap it there. Its colder there, then use electrical tape to keep it on.
FarFarAway
New member
w00t nice Ham
Am waiting to see how these babies turn out when milled
Am waiting to see how these babies turn out when milled
Hehe, cheers guys.
Unforntunatly due to a nice turn of events today, im probably going to have to suspend this againg
. Basicly my replacement motherboard came through, it was the wrong one, but right socket, tired it out and my found out my CPU is dead.
So i need a whole load of new inards!
What progress i can make without spending i will plow on with though. Should get a chance to start on the evap on the weekend. And possibly the only good thing to happen today:
Arrived in the post. Costs about £20 retail, got it £8 posted on fleebay.
15m of 3mm thick armaflex tape
Unforntunatly due to a nice turn of events today, im probably going to have to suspend this againg
. Basicly my replacement motherboard came through, it was the wrong one, but right socket, tired it out and my found out my CPU is dead.So i need a whole load of new inards!
What progress i can make without spending i will plow on with though. Should get a chance to start on the evap on the weekend. And possibly the only good thing to happen today:
Arrived in the post. Costs about £20 retail, got it £8 posted on fleebay.
15m of 3mm thick armaflex tape
FarFarAway
New member
Gah Ham that sucks ass!!
Bout time i got off my ass and stopped playing with my C2D.
On ai's request really. The very startings of milling the evap.
Have been umming and rring over which laythe is best suited for this job for a while with the old man and finaly decided the smaller one would be a better option.
Got about 2mm into the 1st step and the moter needs too cool. But by that time i need to be in work, so its persuade dad too cary on for me time
.
Chars guys.
On ai's request really. The very startings of milling the evap.
Have been umming and rring over which laythe is best suited for this job for a while with the old man and finaly decided the smaller one would be a better option.
Got about 2mm into the 1st step and the moter needs too cool. But by that time i need to be in work, so its persuade dad too cary on for me time
.Chars guys.