Good temps for a NH-D14?

General_Chris

New member
do you guys know if this are normal temps for a NH-D14 what they are supposed to be?

as its the wrong way round

Knipsel-9.jpg
 
Seems a little high if that idle temp.

But you didn't say what the ambien temp (room temp) was at the time of test or if those temps were taken under load or at idle.

But it is recommended you take the temp readings when it is under load so you know if you will be in the safe zone if your PC dose get a large CPU load and the temps rise.

I have seen a lot of those i5's go to 4GHz easy, can't remember the load temps tho.
 
Not so good, i had a Hyper TX3 (push pull config) on my i5 750 at 3800Mhz Vcore 1.312 and i got the same load Temps..
 
So a TX3 is as good as a D14
blink.gif
well people don't get the D14 then and save loads of money...
laugh.gif


if not better as i am using more Vcore...

Ahhh just seen your post, I thought it was an i7. Might need reseating and take the fans off the motherboard and fit them via a molex cable, the fans are probs on super silent or the have the adapters fitted.
 
Ahhh just seen your post, I thought it was an i7. Might need reseating and take the fans off the motherboard and fit them via a molex cable, the fans are probs on super silent or the have the adapters fitted.

I'll do a vs this weekend as i need to put my d14 on my i5 ..been way to lazy to do so , or lets say i hate to STOP F@H
wub.gif


one thing , that is that my config is pretty loud with the 92mm fans ...
 
Back
Top