Frist time overclocking need time

[NeverBackDown]

Try running ram at 1.5volts at 1600mhz with 10 cas timings to make it sort of slow and easy to run. Get your CPU stable then work on ram.

 

[joey117]

Right Core speed 4.1 vcore 1.75v Highs core temps 63c , Ram 2400mhz Voltage 1.65v, 9-11-12-31 1T quick test 1 hour it is ok

 

[NeverBackDown]

Try for an 8 hour test. For memory 8+ hour stress testing is ideal.

 

[joey117]

Will the occt test do for that ?

 

[NeverBackDown]

No OCCT will not. OCCT will do the CPU,GPU, and PSU(very odd). Only RAM test i know of is Memtest. Though only use it if you're overclocking memory. Which you are in your case so do that

 

[joey117]

Sorry about the reply time up date anything over 1600 MHz it is not stable that at 1.65v and lose very lose timing 10.13.13.35. 2t and I have try up core voltage but same story crashing blue screen etc etc.

 

[NeverBackDown]

stick with 1600mhz 9-9-9-24 2t timings then at 1.5v, should work as that is the most common settings.

 

[joey117]

Setting work great thank tested of 15 hour no problems

 

[NeverBackDown]

If you feel up to it try setting it 1t instead of 2t. Some ram modules can do it at that setting and most others only at 2t.. Depends on how binned the RAM sticks are.

 

[joey117]

yea it works fine with 1t current timing are 7-8-9-18 1t

Cycle Time is 18 is it worth to keep going lower and testing 18 at the min

 

[NeverBackDown]

Sorry for the delayed reponse..

If you feel the need then sure go for it but it will not make hardly any difference.

 

[vorticalbox]

No OCCT will not. OCCT will do the CPU,GPU, and PSU(very odd). Only RAM test i know of is Memtest. Though only use it if you're overclocking memory. Which you are in your case so do that

Occt only stresses the psu by stressing the whole system for maxium power draw.

 

[joey117]

thanks for the info