Kilbane
Hagrid Look-A-Like
Right then guys, seeming as I am overly tired and can't find the up and go to take decent photos, I thought I would have a play with the clock speeds on my GPU and CPU.
970 is now @1314 base clock which boosts up to a rather healthy 1554mhz while remaining at 61c ...... Don't want to push it any further as it benches well at these speeds. (will update with some bench scores later)
So it comes down to my trusty i5 4670k.
It has been running at 4.5Ghz @1.195v for a while now. So with the more efficient cooling loop (9-10c lower than my H100i) I figured I would push the boundaries a little and see what i can get stable.
here what has happened so far :
5Ghz @1.35v ..... Not going to happen, hangs on post (I considered higher voltage but seems pointless as i would never want to run at anything higher)
4.9 @1.35v ..... Better, just a blue screen at windows start. Reduced my memory speed down to 1600 to try and stabalise, still no go.
4.8 @ 1.35v ..... Still with my memory @1600, boots into windows and runs OCCT for a few minutes before hanging
4.7 ...... So this was stable with my memory back @2400. So I am currently down to 1.25v as I write this.
I will continue to reduce my voltage to see how low it will go @4.7Ghz and let you guys know where I go from here.
Thoughts as always are welcome.
970 is now @1314 base clock which boosts up to a rather healthy 1554mhz while remaining at 61c ...... Don't want to push it any further as it benches well at these speeds. (will update with some bench scores later)
So it comes down to my trusty i5 4670k.
It has been running at 4.5Ghz @1.195v for a while now. So with the more efficient cooling loop (9-10c lower than my H100i) I figured I would push the boundaries a little and see what i can get stable.
here what has happened so far :
5Ghz @1.35v ..... Not going to happen, hangs on post (I considered higher voltage but seems pointless as i would never want to run at anything higher)
4.9 @1.35v ..... Better, just a blue screen at windows start. Reduced my memory speed down to 1600 to try and stabalise, still no go.
4.8 @ 1.35v ..... Still with my memory @1600, boots into windows and runs OCCT for a few minutes before hanging
4.7 ...... So this was stable with my memory back @2400. So I am currently down to 1.25v as I write this.
I will continue to reduce my voltage to see how low it will go @4.7Ghz and let you guys know where I go from here.
Thoughts as always are welcome.