FAH GPU TRACKER V2

[FTLN]

Evening All,

Just wondering how I create a username and join the redline folding team ???

I managed to get Gpu Tracker installed and it has downloaded all the client's but I cant see anywhere where I can join the team and createa username ??

 

[riotcity76]

Click on Setup > Configure and then go to the Tracker Settings tab. You can put any name you want to use as your folding name here, and for team you put 98860.

Here's the full guide for reference http://fahtracker.com/setup.html

You should also get a passkey and fill that in right underneath Team. You can get a passkey here.

Welcome to the team

 

[FTLN]

Thanks, all up and running...

 

[yassarikhan786]

Welcome to the team

 

[kup]

Welcome.

What hardware are you running?

 

[FTLN]

Thanks, im glad to be here,

Im actually using my main rig...

i7 920 @ 4.2

GTX 560 non TI 336 Shader @ 975mhz

20gb ram

GPU is giving me 17.568 ppd and cpu is still showing 0 ppd

Temps are around low 80c on the cores and low 70c on the gpu..

Will try to run for 5 hours a day, 1am to 6am as I get cheap electric between these hours - Is there a way I can configure this in FAH GPU Tracker ???

 

[SnW]

Nice stuff mate and welcome to the Team , great to have you onboard

 

[FTLN]

Nice stuff mate and welcome to the Team , great to have you onboard

Thanks mate,

Are your 560's TI or 336 ? what ppd are you getting on a 560 ?

 

[Pickster]

Welcome aboard.

I don't want to rain on your parade but how stable is your 560 overclock? The only reason I ask is, unlike gaming, folding need to be 100% stable with no errors.

Most of the time the folding clinet will catch the error and you will lose the work unit and not get any points for it.

As for the PPD, thats pretty high for a 560. Is the points for the work unit around the 3800 mark? Because they released some new ones with a higher PPD than the older ones which would make sence of your GPU PPD.

Scrap that just seen your pic lol

Normally the PPD for the CPU will show up after a few % have complete.

EDIT:

You will lose alot of PPD on the SMP if you don't finish the work unit in one sitting.

AT the moment I would advise you to just fold on the GPU untill you have completed and sent back 10 work units. Only after you have sent back 10 units will you get the bonus points for the SMP.

 

[kup]

I'm sure the 10 Work Unit requirement can only be completed on the CPU Client?

 

[Pickster]

I'm sure the 10 Work Unit requirement can only be completed on the CPU Client?

It was confirmed to me on this forum that GPU units count. I don't really understand why they would but they certainly seem to.

 

[kup]

Ah fair enough.

I completed my 10 so long ago that I haven't paid much attention since. lol

 

[Pickster]

Ah fair enough.

I completed my 10 so long ago that I haven't paid much attention since. lol

When I got back into folding last summer I'm pretty sure I was getting bonus points right away and before that all the folding I had done was on 1 gpu and multiple unicore clients.

I cant remember who it was on here but they were getting bonus points when they first started folding SMP and all they had folded before that was GPU units.

Rather handy when people are getting issued work units with a 1500 point base.

 

[SnW]

Thanks mate,

Are your 560's TI or 336 ? what ppd are you getting on a 560 ?

I have 2x GTX560Ti and 1x GTX560 non Ti,

The 2x GTX560Ti's get 15xxx+ (overclocked) PPD the non Ti gets 10xxx+ PPD (stock for now).

but depending on the WU given it can get more PPD, as on a 8032WU my GTX560Ti's get 20xxx PPD (new BEta WU's)...

Greetings Ray........

 

[stevehat1]

Welcome to 98860!!

 

[SnW]

Under what name are you Folding FTLN ?

EDIT NVM just saw the screenshot FTLN it is.......