errors

[blair]

i have my 10190T at this

200 fsb

20x multiplyer

1.48 according to the BIOS but cpuz says 1.44

i can log into windows but if i do prime95 test side bar stops working CCC stops and core 5 and 6 have errors

i have a asus m4a88td-v why do i get different voltage readings

 

[dugdiamond]

up your volts

cpuz and bios never match up

 

[dugdiamond]

btw what gpu do you have installed?

 

[blair]

XFX HD 5870

 

[blair]

im at 4.9v and 20 multipler and 200 fsb and crash under load

trying 18 ratio and 200fsb and 1.45v i logged into windows fine doing prime blend test now

 

[blair]

i got voltages at manual in biod and typed in 1.45 but cpu-z how says 1.51v i dont want to kill the cpu

 

[dugdiamond]

try 1.472v

 

[dugdiamond]

i have had my 1055T @ 1.53v with no problems

what cooler are u using?

 

[blair]

it seems stable at 18 multi and 200fsb and 1.45v primes been running for nearly 10 mins but LLC is on auto and voltage changes loads is this why its stable atm? ill try 1.47 and up the fsb to 210

whats the max voltage a phenom 2 chip can take?

 

[dugdiamond]

depends on what cooling you are using!!!

if you are using the stock cooler DO NOT overclock too much - it will get too hot and you will be re-booted

 

[blair]

i got a antec 620 whats max voltage?

 

[dugdiamond]

push/pull - or just the fan that came with it?

 

[blair]

push pull and i got side fan right next to it feeding it air

at 1.47v and fsb 210 and ratio 18 it seems stable so far

i disabled LLC

cpu says 57 and cores say 50 no crashed but temps going up

 

[dugdiamond]

AFAIK, max volts for 1090T are <=1.55v

max temps ~55C-59C with your cooling solution

 

[dugdiamond]

cool - save those settings and run prime again

 

[blair]

temps appear to have sabalized at cpu 58 and cores 50 which should i pay attention to and what it too hot?

 

[dugdiamond]

click on my cpu-z validator for a hint on doing yours

 

[blair]

k cpuz says my cpu is 1.6ghz but everything else says 3.8 whats the hell is going on but stable

 

[blair]

seems stable at 3.8 going to up fsb to 220

 

[blair]

bsod ftw upping voltage to 1.48