d-14 or xspc rasa 750

PunisheR_`

New member
XSPC Rasa 750 RS360 Universal CPU Water Cooling Kit $150

http://www.pccasegear.com/index.php?main_page=product_info&cPath=207_160_45&products_id=16616

OR

Noctua NH-D14 CPU Cooler $108

http://www.pccasegear.com/index.php?main_page=product_info&cPath=207_23_769&products_id=13232

Witch one of those 2 would i get lower temps with and also how much lower.

Edit: I'm getting the Haf X, can i mount the 360 rad at the top of the case and keep the 2 fans in the slots up there without having to take them out to fit the rad?
 
Have a look at this vid - there are a few more on the build as well if you are interested.

[media]http://www.youtube.com/user/TimeToLiveCustoms#p/u/38/8zGAjOVJN8k[/media]
 
You need to use 120mm fans on the rad for it to work properly. That means removing the stock ones in the roof.
 
If its an rs360 rad. You can use 120mm on bottom pushing out top of case. And still leave big fans in top. Look at my rig in sig. Im cooling a 950 @ 4.2ghz and also a 6970 in my loop. RX rad will fit but may interfere with ram or vrm heatsinks. My temps never get over 60c on the cpu. And never over 42c on the gpu full load. Using prime95 and benchmarks.
 
thanks for your help guys really apreciated will get the XSPC for the extra 40 dollar.

should i buy some noctua fans to go with the rad or is the fans it comes with good enough.
 
Noctua,Akasa apache or viper,Phobya nano,Scythe gentle typhoon,Cm sickleflow to name a few with high pressure.
smile.gif
 
Not sure if they are worth the money, but i have no personal experience with them. The sickle flow's that I used are really good for the price, and have decent CFM
 
The excalibur are good but you need a fan controller for them.Running 2000rpm they are loud,and three of them it sounds like a jet engine taking of
laugh.gif
At 70% fan they are shifting air,and are almost inaudible.

Akasa apache are really good,at 100% they are barely audible and i have five(5) in one rig.Just notice they have 4 pin pwm.

But i would prefer a fancontroller anyway.
 
Hello every1,i have some questions ,that is about rasa360 cooling system ,MxFScotch what comes in pack with this cooler and what addition i have to buy? And about liquid, how often have to fill it up in the pump? and about that VGA part,i guess it doesn't come with rasa set ,so what is name of that part and is there worth difference between temperatures with that cooler and air cooler which comes with vga? I have pllaned to install it on MSI gtx 580 lightning xtreme 3gb...
 
If its an rs360 rad. You can use 120mm on bottom pushing out top of case. And still leave big fans in top. Look at my rig in sig. Im cooling a 950 @ 4.2ghz and also a 6970 in my loop. RX rad will fit but may interfere with ram or vrm heatsinks. My temps never get over 60c on the cpu. And never over 42c on the gpu full load. Using prime95 and benchmarks.

No REMOVE the 200's as they do nothing for the rad at ALL.
 
Back
Top