CosmosX Project
- Thread starter SaaintJimmy
- Start date
Dark NighT
New member
That looks really cool, the pipe design is great!
SeanAngelo
New member
very nice work! can't wait to see the finished project! 
SaaintJimmy
Member
Update time! Finally got the MSI GamingX GTX 1080Ti I'll be using for this mod and went on with the modifications.
Did a thing with the top handles of the C700P... I kept seeing people polishing, brushing or painting them and I just didn't feel like doing the same thing, so I added some aluminum details!
Then went to back side of the case to figure a design out, came up with this freaky panel:
Then cut two openings on the side panel (f**k that was tough, that panel is a beast) as well as two pieces of mesh from the original front dustfilter to put them behind those strips.
Going back to the internals, having the graphics card mounted I could finalize the bottom shroud's pass-through holes, and I also started designing the cutouts to let the air flow (one of two rads is at the bottom)
Did a thing with the top handles of the C700P... I kept seeing people polishing, brushing or painting them and I just didn't feel like doing the same thing, so I added some aluminum details!
Then went to back side of the case to figure a design out, came up with this freaky panel:
Then cut two openings on the side panel (f**k that was tough, that panel is a beast) as well as two pieces of mesh from the original front dustfilter to put them behind those strips.
Going back to the internals, having the graphics card mounted I could finalize the bottom shroud's pass-through holes, and I also started designing the cutouts to let the air flow (one of two rads is at the bottom)
Last edited:
Dark NighT
New member
This is looking to be one of the best projects this year!
SaaintJimmy
Member
Ok I got a HUGE update for you guys, I must have forgotten to update the threads and ended up with 41 pics to share!
Today we'll see the last panels made, a custom lightbar and almost everything of the paintjob. Tomorrow I'm starting the final assembly!
Midplate vents opened
Drainport
Front cover for the PSU cables (because why place it the right way when you can do it reversed?)
Cover for the GOODRAM ram, which are red and don't fit so well.
Lightbar making
Fit and lighting test
Mods for the back panel
Now let's get everything ready for the painting phase. Honestly, my least favourite part but at the same time, the one that gives the most eye candy
Very close to the end. Please hold tight thank you for following!
Today we'll see the last panels made, a custom lightbar and almost everything of the paintjob. Tomorrow I'm starting the final assembly!
Midplate vents opened
Drainport
Front cover for the PSU cables (because why place it the right way when you can do it reversed?)
Cover for the GOODRAM ram, which are red and don't fit so well.
Lightbar making
Fit and lighting test
Mods for the back panel
Now let's get everything ready for the painting phase. Honestly, my least favourite part but at the same time, the one that gives the most eye candy
Very close to the end. Please hold tight
thank you for following!
SaaintJimmy
Member
And finally, the last update before the final pics. This one will follow the final assembly.
First, bottom radiator and psu
I made the power cord pass through the bottom dust filter
Mobo tray cover and top panel with tubes
Front view with reservoirs and clear panel installed
Midplate, more panels and pumps mounted
Soft tubes for the bottom section
And last but not least, hardline installation
Then filling, leak testing and air bleeding...
And it's alive!
I'd like to take the chance to invite to you to vote for my project in April's Case Modding Update: https://forums.bit-tech.net/index.p...pril-2018-in-association-with-corsair.345005/
Thank you very much guys! Final pics coming in the next days!
First, bottom radiator and psu
I made the power cord pass through the bottom dust filter
Mobo tray cover and top panel with tubes
Front view with reservoirs and clear panel installed
Midplate, more panels and pumps mounted
Soft tubes for the bottom section
And last but not least, hardline installation
Then filling, leak testing and air bleeding...
And it's alive!
I'd like to take the chance to invite to you to vote for my project in April's Case Modding Update: https://forums.bit-tech.net/index.p...pril-2018-in-association-with-corsair.345005/
Thank you very much guys! Final pics coming in the next days!
Dark NighT
New member
Absolutely Stunning!
SaaintJimmy
Member
It's finally time to reveal the final pics for CosmosX Project!
I want to thank everyone for the great feedback, as well as all my sponsors for always giving me the chance to make projects come to life!
I also still invite you to go vote for me at the Case Modding Update:
https://forums.bit-tech.net/index.p...pril-2018-in-association-with-corsair.345005/
See you at the next worklog!
I want to thank everyone for the great feedback, as well as all my sponsors for always giving me the chance to make projects come to life!
I also still invite you to go vote for me at the Case Modding Update:
https://forums.bit-tech.net/index.p...pril-2018-in-association-with-corsair.345005/
See you at the next worklog!
Last edited:
Dark NighT
New member
Yeah absolutely loving this, the bends are just amazing, the detailing overall is excellent!
SaaintJimmy
Member
scubasteve
Member
lovely , been watching it progress
well done it looks great dude deffo a competition winner if it was ever entered in one , hats of
well done it looks great dude deffo a competition winner if it was ever entered in one , hats of
SaaintJimmy
Member
lovely , been watching it progress
well done it looks great dude deffo a competition winner if it was ever entered in one , hats of
Thank you very much! It's actually participating to a competition right now (linked in the final pics post, you can easily go vote there if you want) and it's my main entry for the Case Mod World Series 2018
SaaintJimmy
Member
Velly noice. Frog is a nice touch
Thanks! It's a display mod for the store PC Frog and that is their logo, it's nice indeed
scubasteve
Member
got my vote
Last edited:
