Copperhead Lian Li X79 Copper Pipe

Last edited by a moderator:
Do you mind me asking where did you buy them and what model are they? I like them and I am looking for an led kit for the switch 810.

Regards
maniac
 
reeper250 said:
Probably could but I'm not sure how to. I would have to make some sort of special cable because the LED system uses a special interted/controller box thing.
Click to expand...

I think it would work, atleast a couple of days ago I got two led strips although they are single colour and I just connected the positive wire to the yellow molex wire and the negative to the black one and they worked flawlessly.
 
So I took the cooler off the GPU today and look what I found (or didn't find...)
There are thermal pads missing...

 
I was quite shocked when I took off the cooler to find the missing thermal pads because it wasn't just missing on one chip, but a LOT of them :huh:
 
Ok, now I'm really stuck. I have the choice of going with two GTX 680 4GB or two 7970 3GB cards... Which ones should I go for?
 
I have seen people chopping the connector off the 12v power supply and attaching it to a molex connector. Does anyone know how to do this or is there some sort of guide?
BS Mods sells the kit but I already have everything else so I just wanted to know how to make that connector part. Here is the link: http://www.bsmods.com/Mod_Shop.php

EDIT: Will be cutting out the window and rad hole VERY soon ;)
 
Last edited:
Oh My, I'm a sucker for metal piped WC builds, consider me subbed, I'll be back to read more later this afternoon.

Expect a few questions too if you don't mind!

Thanks.
 
reeper250 said:
I have seen people chopping the connector off the 12v power supply and attaching it to a molex connector. Does anyone know how to do this or is there some sort of guide?
BS Mods sells the kit but I already have everything else so I just wanted to know how to make that connector part. Here is the link: http://www.bsmods.com/Mod_Shop.php

EDIT: Will be cutting out the window and rad hole VERY soon ;)
Click to expand...

Looking at the picture on bsmods I actually get the impression that the PSU is not
plugged into the 12 V line but the 5 V line. I'm not 100 % sure, but it looks like the
chamfered edges on the molex plug are on top, which means that the wire towards
the picture's top would be the 5 V wire (source).

It doesn't look too difficult, but do you have a pic of the PSU in its current state?
Maybe there are some pitfalls that aren't visible on that picture on bsmods.
 
You_What? said:
Oh My, I'm a sucker for metal piped WC builds, consider me subbed, I'll be back to read more later this afternoon.

Expect a few questions too if you don't mind!

Thanks.
Click to expand...

Questions are great, thanks for looking.


alpenwasser said:
Looking at the picture on bsmods I actually get the impression that the PSU is not
plugged into the 12 V line but the 5 V line. I'm not 100 % sure, but it looks like the
chamfered edges on the molex plug are on top, which means that the wire towards
the picture's top would be the 5 V wire (source).

It doesn't look too difficult, but do you have a pic of the PSU in its current state?
Maybe there are some pitfalls that aren't visible on that picture on bsmods.
Click to expand...

I'm thinking that the picture MAY be mirrored? The little RGB box says it require 12VDC 6A. Thank-you very much for that link though :)
Here is a picture of the IR receiver with the 12V power supply plugged into it.

 
You must log in or register to reply here.

Similar threads

B
Proper Copper Pipe PC [Scratch Build]
Replies
16
Views
11K
Blobby 72
B
tolagarf
Phanteks Enthoo Luxe 2018 Refresh
Replies
8
Views
5K
tolagarf
tolagarf
The_Governour
Lian Li Q10 Premium ITX case.
Replies
4
Views
5K
The_Governour
The_Governour
B
Monolith
Replies
4
Views
2K
BucketInABucket
B
M
Pocket Rocket - Turning a quad bike, into a gaming/show system!
2 3
Replies
50
Views
18K
MT. Mods
M
Back
Top