Hello thar i recently built a computer a couple of days ago i hooked up everything and stuff. when i went to turn on the power the led fans for my case and the rear fan, processor,and graphics card all were spinning but there was no display it goes into stanby. I tried with just 1 stick of ram and everything and idk wats wrong i think its the mobo im not for sure everything is hooked up so if any1 can help me with this problem i would greatly appreciate it thanx.
Computer Help
- Thread starter LeaftailG
- Start date
Check cables again specially those 2 that goes directly to mobo
second thing is on start put onboard only necessery devices , (if you have 4 hdd, 2x cd rom 2 GPU just stick to minimum to run it), it can be a reason that your devices use more power than psu can provide. did you had strange noise when you turned pc on?
Can you add details of your computer please.
second thing is on start put onboard only necessery devices , (if you have 4 hdd, 2x cd rom 2 GPU just stick to minimum to run it), it can be a reason that your devices use more power than psu can provide. did you had strange noise when you turned pc on?
Can you add details of your computer please.
Yea i just checked those to cords still nothing also here are the things i had hooked up.
Intel Core 2 Quad Q9550 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W
ASUS Black 20X DVD+R 8X DVD+RW 8X DVD+R DL 20X DVD-R 6X DVD-RW 14X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 20X DVD±R DVD Burner with Lightscribe.
Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive - OEM (3 of these)
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory
OCZ GameXStream OCZ600GXSSLI 600W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
ASRock P45R2000-WiFi LGA 775 Intel P45 ATX Intel Motherboard
SAPPHIRE 100242L Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP
Well thats all the stuff i ordered i got them from newegg.com
Intel Core 2 Quad Q9550 Yorkfield 2.83GHz 12MB L2 Cache LGA 775 95W
ASUS Black 20X DVD+R 8X DVD+RW 8X DVD+R DL 20X DVD-R 6X DVD-RW 14X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 20X DVD±R DVD Burner with Lightscribe.
Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive - OEM (3 of these)
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory
OCZ GameXStream OCZ600GXSSLI 600W ATX12V SLI Certified CrossFire Ready Active PFC Power Supply
ASRock P45R2000-WiFi LGA 775 Intel P45 ATX Intel Motherboard
SAPPHIRE 100242L Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP
Well thats all the stuff i ordered i got them from newegg.com
Also check that you have connected any additional power cables fhat your graphics card may need, if you have an old graphics card (or on board graphics) try using that.
Check your CPU is seated well, that it's heatsink is firmly secured to it, and that you connected the additional CPU power connector to the motherboard if there is one.
Check your CPU is seated well, that it's heatsink is firmly secured to it, and that you connected the additional CPU power connector to the motherboard if there is one.
ok i finally got to see my display i look at my mobo and saw my atx 12v connector and on my power supply i saw two cords that were labled cpu 1 and cpu2 and plug them in there and i finally got to get into the bios but when i plug those up all my stuff wasnt spinning as fast as it was b4 is that suppose to happen cus idk if it is i just thought that was weird so if any1 can help me out with this thanx
