computergeek
New member
It took me nearly forever to figure out why the OC was only stable for a few days and then BSOD on me.
Erm try because I kept leaving VTT FSB on auto.
!Doh!
><
CPU FSB Frequency
434
CPU Ratio
9
FSB 1:1
CPU Vcore 1.575v
Memory Voltage 2.1v
434
CPU Ratio
9
FSB 1:1
CPU Vcore 1.575v
Memory Voltage 2.1v
Dram Timings
5-5-5-18
NB
1.3v
VTT
NB
1.3v
VTT
1.3v
Here is a just over ten minute run on prime 95 screenshot but others prefer to stress the crap out of the CPU on blend for half an hour or over night.

All this on air cooling using a Arctic Cooler Freezer 7 Pro Rev 2.


Max Temps Under Load
(Running Prime95)
60-63 degrees.

Idle Temps After Test
33-34 degrees.

And for anyone saying oh your vcore is too high well, I did some research on that just to make sure.
It seems because my C2D E6850 3.0Ghz Conroe is manufactured at a 65nm process they can take more volts through them, then say newer CPU's.
According to some but this is still hear say but still.><
And Battlefield 3 runs flawlessly now no jerkiness, no BSOD's nada.

Go figure no wonder my temps are fine even at these OC settings.