BSOD really bad!

[blair]

Hi, Not sure if this is the right sub forum but here is the problem.

It all started after i got a ssd clean install everything fresh all latest drivers (updated firmware on ssd to latest), but everyday i get 2 -5 BSOD in game watching youtube or just left on the login screen.

My cpu is OC but it is stable in prime for 12hours+ ram is manualy set to timing and voltage nothing is overheating ive stress tested the gpu as well with furmark.

i checked the dump files not all are the same error but mostly the 0x0000000d1 and ntoskrnl.exe is mentioned in all, i have included the latest dmp file below.

==================================================

Dump File : 100211-11294-01.dmp

Crash Time : 02/10/2011 00:38:35

Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL

Bug Check Code : 0x000000d1

Parameter 1 : fffff880`245ed0c0

Parameter 2 : 00000000`00000002

Parameter 3 : 00000000`00000008

Parameter 4 : fffff880`245ed0c0

Caused By Driver : ntoskrnl.exe

Caused By Address : ntoskrnl.exe+71f00

File Description : NT Kernel & System

Product Name : Microsoft® Windows® Operating System

Company : Microsoft Corporation

File Version : 6.1.7600.16385 (win7_rtm.090713-1255)

Processor : x64

Crash Address : ntoskrnl.exe+71f00

Stack Address 1 :

Stack Address 2 :

Stack Address 3 :

Computer Name :

Full Path : C:\Windows\Minidump\100211-11294-01.dmp

Processors Count : 6

Major Version : 15

Minor Version : 7600

Dump File Size : 288,751

==================================================

attached is a list of all BSOD.



Please anyone any idea it is driving me crazy.

 

[Youngie1337]

Check your memory, IRQL are normally caused by memory problems.

Also could be a buggy driver / incorrect or incompatible drive.

 

[blair]

ive cleaned the ram slots swapped the sticks round ran the windows memory diagnostics found no errors

 

[Youngie1337]

ive cleaned the ram slots swapped the sticks round ran the windows memory diagnostics found no errors

RAM is not the only concern, but normally the main culprit, it could well be other hardware (HDD, PSU etc...)

1st, backup documents & files, format and reinstall Windows. Run it without any drivers (I'd suggest disconnecting from the internet) and then see if it's stable. Once you're happy with it being stable install the drivers one by one until you encounter the problem.

edit: seen the paged in non paged area, tbh, remove the new HDD and try an older one, I think your SSD might need RMA.

All of this can be caused by drivers though, but whenever I received the nonpaged area, it was hardware, 10/10 times.

 

[blair]

Ty for ur help i would imagen its the ssd as i had the exact same hardware and software and drivers on my hdd before and not 1 bsod as soon as i installed the ssd bsod from day 1 i and run ubuntu stable of a live cd. really considering sending the ssd back, also from today windows experiance index says my ssd is 5.9 i have bench marked it and 200mb read 65 write. was 7.9 before.

 

[Youngie1337]

Ty for ur help i would imagen its the ssd as i had the exact same hardware and software and drivers on my hdd before and not 1 bsod as soon as i installed the ssd bsod from day 1 i and run ubuntu stable of a live cd. really considering sending the ssd back, also from today windows experiance index says my ssd is 5.9 i have bench marked it and 200mb read 65 write. was 7.9 before.

First thing would be to do a checkdisk, just to rule out a corrupt NTFS volume.

I would also be worried aboout the bench score dropping, but best to check for errors (on your behalf) as you want a 100% satisfaction it is RMA worthy.

Instructions here:

http://www.schrockinnovations.com/how-to-run-a-chkdsk-to-repair-your-damaged-hard-drive-2/

 

[blair]

Thanks, problem is ive ran my own hard drive checks that i have used in the past to find faulty SSD's and it passes on every test.

im going to do a repair using the windows 7 disk if that does not work will install it on my HDD and if no BSOD will RMA SSD.

 

[blair]

Returned the drive to Scan who say there is nothing wrong with it, saying its my hardware but i have tried the same SSD in 3 different pc's/laptop with a full format and reinstall and and same BSOD, all are stable with normal HDD,

However i contacted OCZ and they said that i should RMA as they believe it could be a faulty drive.

The drive is running 2.15 which was meant to stop the BSOD problems associated with sandforce controllers.

Anyone had problem with scan before?