The holes i needed landed in the middle of the fan grilles on top of the case.
So i made a new roof for the fans and radiator.
Made out of 2mm styrene, mounted to the case it will be stiff enough.
I use the 140mm holes to rivet the plastic to the case, and made new holes for 120mm and radiator.
This is a prototype and the real deal will cover the complete top of the case to get something to build the case top from.
Rad mounted inside, it will go up about 10mm more, dont have shortened the bolts yet
But... the rivets bent the s*it out of the styrene plastic, i will drill them out tomorrow as its just a test to see if riveting the top is possible, wich its not
The roof will get the same "look" as the front later, here testing with some cardboard to see what i´m deling with
Side view of the case will look something like this.
Grey parts are the "wings" on the top and front. (dimensions not correct, just a 30 sec paint)